FINITE ELEMENT BASED PREDICTION OF DEFORMATION IN SHEET METAL FORMING PROCESS
Journal Title: Applied Computer Science - Year 2018, Vol 14, Issue 3
Abstract
In this paper the sheet forming process of cylindrical drawpieces was sim-ulated based on the finite element method by the explicit approach in the pres-ence of contact conditions with isotropic and anisotropic friction. The ex-perimental and numerical results obtained in the Abaqus finite element (FE) based program are presented. The aim of the experimental study is to analyse material behaviour under deformation and in addition to use the results to verify numerical simulation results. It was found that, although, the anisotropy of resistance to friction affects the height of ears, the influence of the friction formulation is relatively small in comparison with material anisotropy. The study indicates that FE analysis with 3-node triangular shell element S3R elements ensures the best approximation of the numerical results to the real process when both material and friction anisotropy are taken into account.
Authors and Affiliations
Damian KRASKA, Tomasz TRZEPIECIŃSKI
Keywords
Related Articles
- EP ID EP559257
- DOI 10.23743/acs-2018-20
- Views 98
- Downloads 0
NUMERICAL SIMULATIONS OF SANDWICH STRUCTURES UNDER LATERAL COMPRESSION
The current paper analyzes the effect of the cross-section on the energy absorption capabilities of sandwich structures under compressive loads. For this purpose, several cross-section including triangular, square, hexag...
THE USE OF SIMULATION ENVIRONMENT FOR SOLVING THE ASSEMBLY LINE BALANCING PROBLEM
The paper describes the application of a simulation environment (Tecnomatix Plant Simulation) for solving a real manufacturing problem. The studied case consisted in rebalancing the production line with a specified numbe...
A NOVEL APPROACH TO ENHANCE THE PERFORMANCE OF MOBILE AD HOC NETWORK (MANET) THROUGH A NEW BANDWIDTH OPTIMIZATION TECHNIQUE
Now is the age of information technology. World is advancing day by day. At present in this progressing world communication from one place to another has become so easy, less costly, and faster. This modern life is almos...
2D IMAGE-BASED INDUSTRIAL ROBOT END EFFECTOR TRAJECTORY CONTROL ALGORITHM
This paper presents an algorithm for programming an industrial robot’s end effector path based on 2D images. The first section gives a brief overview of modern solutions for industrial robot implementation. The next sect...
NUMERICAL ANALYSIS OF THE DRAG COEFFICIENT OF A MOTORCYCLE HELMET
The paper discusses a numerical investigation, using a CFD tool, ANSYS FLUENT, of drag acting on a motorcycle helmet. The simulations were performed on a model of a helmet downloaded from a free CAD model library. A soli...