Firmware implementation and experimental research of the phase-locked loop with improved noise immunity
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 5, Issue 9
Abstract
<p>This paper presents a method for improvement of the phase-locked loop (PLL) noise immunity by using a modified phase detector. The article shows structural diagram of the PLL with the modified phase detector and describes the criterion for choosing the parameters of the narrowband filter and the high-pass filter to prevent distortions of information signal. Simulation of both classical and modified devices was carried out to find a noise threshold, which causes phase-locked loop to unlock. Simulation results show that multiple cycle slips of synchronization in short period of time in modified PLL occur for higher levels of noise (by 1.5–4 dB depending on PLL parameters), than in classical PLL. Both devices were software implemented on FPGA (field programmable gate array) logic and experimental studies of their noise immunity were conducted. The results of experimental studies qualitatively correspond to simulation ones and show that the that noise threshold of the modified phase detector is greater up to 1–2.5 dB depending on the device parameters. Experimental research also shows that modified phase detector does not deteriorate the dynamic properties of whole device and even improves them in comparison to classical PLL.</p>
Authors and Affiliations
Andrii Bondariev, Serhii Altunin, Ivan Horbatyi
Keywords
Related Articles
- EP ID EP528210
- DOI 10.15587/1729-4061.2018.143178
- Views 72
- Downloads 0
Synthesis and implementation of fractional-order controllers in a current curcuit of the motor with series excitation
<p>We have synthesized and investigated fractional-order regulators, which provide for a series of technological processes the best indicators for the quality of transient process, specifically DC motors with series exci...
Design and examination of the new biosoluble casting alloy of the system Mg–Zr–Nd for osteosynthesis
<p>We have performed a comparative analysis of existing materials for the fabrication of implants and report their physical-mechanical properties; their advantages and disadvantages have been defined. It is shown that ma...
Theoretical and experimental analysis of solar enclosure as part of energy-efficient house
<p>The use of solar energy as a potential alternative source to ensure the heat supply to energy-efficient houses was explored. We have performed preliminary theoretical analysis of energy indicators for the combined hea...
“Green” synthesis of nanoparticles of precious metals: antimicrobial and catalytic properties
<p class="m7080559152827552372gmail-msoplaintext">The paper presents the use of agricultural products, namely grape skins, in the “green” synthesis of monometallic (Au, Ag) and bimetallic (Au-Ag) nanoparticles (NPs) from...
An integrated website of electronic data interchange and computer-aided process planning in production outsourcing
<p>The assembly industry implements production outsourcing to meet the needs of assembly product components. The outsourcing of assembly product components is based on a relationship model between the contractor and the...