Flexural Performance of Mortise-tenon Prestressed Bolt Joints in Prefabricated Station Structure
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 7
Abstract
Objective The rationality of joint structures is crucial for station safety. Therefore, it is necessary to study the enhancement effect of additional prestressing measures on the flexural performance of prefabricated station structure bolt joints. Method A refined finite element model of mortise-tenon prestressed joints using prestressed bolts is established. Through four-point bending loading, the influence of different bolt design parameters on the flexural bearing capacity of joints is analyzed. Result & Conclusion During the bending moment loading process, joints connected by prestressed bolts exhibit good overall integrity. Stress concentration on the handhole position on the concave-side component tension side leads to tensile failure of nearby concrete. The vertical displacement and joint-seam opening of prestressed bolt joints gradually decrease with increasing bolt diameter and length, and the reduction amplitude decreases as the bolt diameter and length increase. Setting bolt preload force can significantly improve the flexural capacity of the joints, with a noticeable effect on controlling the deformation of joint-seam opening. Recommendations to optimize design parameters for prestressed bolt diameter, length and preload force are proposed.
Authors and Affiliations
Yanwei ZANG, Changbao LIU, Tianyang ZHANG, Jiajia YAN, Bochuan WANG, Honggui DI
Keywords
Related Articles
- EP ID EP742611
- DOI 10.16037/j.1007-869x.2024.07.027
- Views 76
- Downloads 0
Transport Capacity Enhancement for Shanghai Urban Rail Transit Existing Lines
Objective Aiming to propose effective methods and specific cases for capacity enhancement, the implementation experiences of capacity improvement renovation projects on existing Shanghai urban rail transit lines are syst...
Interlocking Interface Scheme for Urban Rail Transit Existing Depot Signaling System Renovation
Objective After reaching an operational lifespan, the signaling systems of existing urban rail transit lines need updating and renovation. A depot interlocking interface scheme should be developed to achieve a smooth tra...
Safety Envelope Management Method for Marshaled Trains Based on Time Delay Protection
[Objective] In flexible marshaled trains, the communication delay between the master railcar, subordinate railcar and ZC (zone controller) exhibits asynchrony, leading to potential issues such as overlapping, misalignmen...
Mapping Law of CRTS Ⅱ Type Slab Ballastless Track Static Deformation Due to Subgrade Horizontal Deformation
Objective Aiming at the insufficient control indexes for high-speed railway subgrade horizontal deformation currently, it is necessary to study the influence law and limit values of ballastless track subgrade horizontal...
Fault Analysis and Resolution Measures for Overvoltage Chopping IGBT of Chongqing Rail Transit Line 2 Trains
[Objective] Multiple incidents of overvoltage chopping IGBT (insulated gate bipolar transistor) faults are observed during train main line operation of Chongqing Rail Transit Line 2, significantly impacting the line norm...