Flow Behavior of 1.4841 Steel in Hot Compression Process

Journal Title: Jurnal Kejuruteraan - Year 2018, Vol 30, Issue 1

Abstract

Hot compression experiments using a dilatometer were carried out in order to study the effects of hot compression parameters on the flow behaviour of 1.4841 steel. Specifically, the effects of the strain rate and the deformation temperature within a temperature range of 950 – 1100 oC, strain rate of 0.001-0.5 s-1and strain value of 0.5 were studied among all the effective hot compression parameters. The results were shown in the actual strain–stress curve. Embedded in the work hardening, recrystallization and recovery theories, the hot compression mechanism was determined by focusing on the flow behaviour patterns of this steel. The sensitivity to strain rate and temperature, activation energy and the Zener – Holloman parameter were also investigated. Critical strains (εc) of 0.2 and 0.35 were calculated for strain rates of 0.001 and 0.01 s-1, respectively. The findings showed that the recrystallization and flow stress fell when a deformation was imposed at a low strain rate and high temperature. A further increase in the strain rate and a decrease in the temperature resulted in a dynamic recovery mechanism as the dominant process. With an increase in the temperature, the strain rate sensitivity increased, and the rise in the strain rate resulted in a decrease in the temperature sensitivity. The temperature sensitivity (ηa) for various strain rates was estimated more precisely to be within the range of 5.3 to 11.2. The QHW was measured and the value was 459.186 kJ/mol.

Authors and Affiliations

Javad Rajabi

Keywords

Related Articles

Carbon Dioxide Adsorption on Activated Carbon Hydrothermally Treated andImpregnated with Metal Oxides

Activated carbon (AC) has been used widely as an agent for carbon dioxide (CO2) adsorption due to its environmentally friendly nature, low cost, high porous structure, high surface area and good mechanical properties. Mo...

Lagrangian Investigation on the Compound Effects of Reclamation and Proposed Tidal Barrage to the Environmental Flow

Large-scale reclamation at Tekong Island, Singapore and the construction of a tidal barrage across Johor River in Kota Tinggi is expected to alter the local hydrodynamics in Johor River Estuary (JRE) and East Tebrau Stra...

Study on Drivers’ Behaviour Relationships to Reduce Road Accidents in Puchong, Selangor Darul Ehsan

Road accidents are the most common phenomenon in our daily life which occurs in every part of the world. In Malaysia, these issues took away many precious lives despite causing problems to the living family. Based on the...

Pembangunan Kawalan Logik Kabur dalam Reaktor Lapisan Terpadat (Development of Fuzzy Logic Controller for Packed Bed Reactor)

Fuzzy logic control system on simulation model was created using MATLAB Simulink R2011a in order to control the isomerization process of glucose to fructose in recycled and non-recycled packed bed reactor. Immobilized gl...

Preliminary Study of Alkaline Direct Ethanol Fuel Cell by Using Crosslinked Quaternized Poly (Vinyl Alcohol)/Graphene Oxide Membrane

A crosslinked of Quaternized Poly (vinyl alcohol)/Graphene oxide (QPVA/GO) composite membrane was prepared via quaternization and solution casting method. With the main objective is to performed lower ethanol permeabilit...

Download PDF file
  • EP ID EP455553
  • DOI 10.17576/jkukm-2018-30(1)-03
  • Views 71
  • Downloads 0

How To Cite

Javad Rajabi (2018). Flow Behavior of 1.4841 Steel in Hot Compression Process. Jurnal Kejuruteraan, 30(1), 17-22. https://europub.co.uk./articles/-A-455553