Focusing on Energy Consumption in Data Transfer and its Minimization using Bluetooth and Wi-Fi
Journal Title: GRD Journal for Engineering - Year 2017, Vol 2, Issue 6
Abstract
In today’s world, there is an increasing demand of high data transfer rates in the IT industry which is highly achieved at the expense of a large amount of energy. The most common way to establish communication between the devices is to use Wi-Fi whether it is being used to browse internet or being used to transfer the data. The basic Wi-Fi offers high bandwidth which is much greater when compared to what Bluetooth provides. At the same time, while using mobile phones in specific, Wi-Fi uses a lot more power as compared to Bluetooth (active as well as inactive mode), which reduces the battery efficiency of the mobile phones. To overcome this issue, we propose to use Bluetooth and Wi-Fi alternatively by switching between these technologies based on the application requirements demand raised instead of performing the switching process based on the bandwidth used. The proposed scheme doesn’t require any change to the mobile applications but still increases the battery efficiency of the mobile devices and reduces the power consumption of data transfer.
Authors and Affiliations
Montek Singh, Swapnil Gupta, Srijan Gupta
A Dedicated Setup to Recognize Spoofing In LAN/ Wi-Fi via IP Configuration
In computer networks, it consists of policies and practises adopted to prevent and monitor unauthorised access. Networks can be both public and private where many of the counter attacks were practised. It is long known t...
Removal of Hexavalent Chromium from Wastewater by Adsorption: A Review
Amount of waste water containing heavy metals is increasing in the environment due to industrialization. Heavy metals treatment of waste water should be done due to increase in pollution and scarcity of water. Hexavalent...
Implementation of Fault Tolerant FIR Filter for Digital Communication Systems
A realistic communication system is not free from noise. So the transmission of information through may rather be corrupted by noise in the channel. Therefore it is necessary for every communication systems to have suita...
Application of Fuzzy FMEA to Indian Railway Signalling Systems
The paper deals with the failure analysis of railway signalling systems, in general, and Indian Railway signalling systems, in particular. It is worth mentioned that failure of railway signalling subsystems and systems h...
Fabrication of Paddy Drier Processor
There is an essential need to dry grain quickly and effectively after harvest and before storage to retain maximum quality, to attain a moisture content sufficiently low to minimize infestation by insects and microorgani...