Forming a defective surface layer when cutting parts made from carbon-carbon and carbon-polymeric composites
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 1
Abstract
<p class="papertitle">We report results of theoretical and experimental research aimed at establishing the mechanisms for the formation of a defective layer at the machined surfaces made from carbon composite materials, specifically those from carbon-carbon and carbon-polymeric groups. Possessing a set of unique physical and mechanical properties, the latter are increasingly applied in aviation and space technologies. However, since the properties of a material are predetermined not only by the components applied but also by the processes to obtain products (laying of reinforcing fibers, orientation of threads), conducting mechanical tests of samples-witnesses is a compulsory stage in the operations performed.</p><p class="papertitle">Based on the generalization of statistical and theoretical-analytical information, we have developed a model of the emergence and propagation of cracks in a quasi-fragile material, particularly the carbon-carbon and carbon-polymeric composites, caused by the action of a cutting wedge. It is shown that the stresses that occur in a surface layer predetermine the intensity of crack growth while a direction of microcracks propagation is due to the applied force load. Therefore, control over the direction of force action, as well as the application of certain technical means, including a hydroabrasive jet, could enable the localization of microcracks in small quantities at the surface of the formed edge.</p><p class="papertitle">The established regularities in the formation of a defective layer at machining (including the hydroabrasive cutting) have made it possible to identify ways to improve the quality of a sample and to reduce the layer thickness to 0.05 mm. The derived dependences of the destruction zone parameters on the stresses that occur at cutting allowed us to obtain the rational sequence of machining transitions, at which the defective surface layer is the smallest.</p><p class="1">The results obtained provide a possibility to significantly increase the accuracy of mechanical tests of carbon composite materials, thereby reducing the variance in the measurements of controlled parameters by 30‒40 %.</p><p class="papertitle">The results have been actually implemented industrailly, and are of interest for the further research aimed at the hybridization of processes, as well as the development of technologies based on a functional-oriented approach.</p>
Authors and Affiliations
Alexandr Salenko, Olga Chencheva, Evgeny Lashko, Viktor Shchetynin, Sergey Klimenko, Irina Gusarova
Keywords
Related Articles
- EP ID EP528051
- DOI 10.15587/1729-4061.2018.139556
- Views 57
- Downloads 0
Development of geomodel for concentration determination of hazardous chemicals in the atmosphere
A critical analysis of the approaches to the development of a model for determining the concentration of hazardous chemicals (HC) in the atmosphere, which are the basis of computeraided environmental monitoring systems...
Construction of the integrated method to model a system for measuring the density of infrared radiation flows
<p>We have constructed an integrated method to model the system of measuring the density of flows of infrared radiation based on solving the inverse problems of dynamics using the Volterra equation of the first kind and...
Experimental investigation of the fireextinguishing system with a gasdetonation charge for fluid acceleration
<p>To improve the parameters of pulsed fire-extinguishing plants for long-range and mass and dimensional indicators, it was proposed to replace the pneumatic propellant charge with the gas-detonation charge. The charge i...
Construction of models for estimating the technical condition of a hydrogenerator using fuzzy data on the state of its local nodes
<p>The task on estimating the technical condition of a hydrogenerator under conditions of fuzzy information has been resolved. To this end, a series of models have been constructed for the integrated estimation of the te...
Synthesize of the integrative trigeneration system for a «solar house» in the Middle East region
<p>This research aims to synthesize a trigeneration system for a "solar house" based on an autonomous small solar photovoltaic plant, which could meet the year-round private consumers' needs for heat and cold supply.</p>...