Frame-based synchronization adaptive method for systems based on DVB-S2 standard on FPGA
Journal Title: Вісник НТУУ КПІ. Серія Радіотехніка, Радіоапаратобудування - Year 2015, Vol 0, Issue 62
Abstract
Introduction. With the development of digital technology, increasingly greater attention is paid to building radio-receiving paths based on SDR technology (Software Defined Radio). This technology involves the construction of SoC system on FPGA. Synchronization system is an important part of any radio system. This article analyzes the frame synchronization algorithms used today in terms of their efficiency and practical implementation on FPGA. Problem Statement. There are many frame synchronization algorithms for communication systems. Algorithms based on differential correlation method are extensively used these days because they are insensitive to phase and frequency distortions. The main disadvantage of the existing methods is their sensitivity to changes in the level of the input signal. Therefore, the development of the algorithm with an adaptive threshold for implementation on FPGA is an important task. Frame synchronization algorithm for DVB-S2 standard. This section shows analysis of modern frame synchronization algorithms, which are used in DVB-S2 receivers, and shows characteristics of MDP. Frame synchronization algorithm with adaptive threshold. Algorithm with adaptive threshold [P2], which is resistant to changes in the level of the input signal, is suggested. Also a comparative analysis of this method and methods listed above is made. Modification of the algorithm [P2] for implementation on FPGA. This section shows practical ways to implement the adaptive algorithm on FPGA hardware platform. In particular, the approximating method was used to find the location of the complex number modulus, the implementation of which is easily performed on the FPGA chip logic elements without loss of performance of the algorithm as a whole. Conclusions. Suggested adaptive frame synchronization algorithm eliminates Automatic Gain Control (AGC) system from signal processing phase. This approach of using an adaptive threshold can be used for more sophisticated algorithms, in particular for DPDI. In future works, these tasks will be addressed.
Authors and Affiliations
O. Kruhlyk, M. Pavlenko
Keywords
Related Articles
- EP ID EP308801
- DOI 10.20535/RADAP.2015.62.77-86
- Views 76
- Downloads 0
Breakdown of electrocardiogram based on modified method of Computational Methods for P-interval
ECG prong effective search problem solution and classification of this interval by means of modified Karunena-Loev's qualifier are considered.
Analysis of the influence of sound signal processing parameters on the quality voice command recognition
Introduction. For the task of voice control over different devices recognition of single (isolated) voice commands is required. Typically, this control method requires high reliability (at least 95% accuracy voice recogn...
Comparative analysis of potential characteristics of 2nd degree, 3d degree and 4th degree frequency modulated probing signals
Introduction. Complicated signals with the button ambiguity function can provide the distance and speed of target independent estimation. These include the signal with the 2nddegree that has been carefully researched ear...
Eguipment and technologies of low intensity millimeter therapy
Introduction. Mastering the millimeter range of wavelengths has led to apperence of different types devices and their usage in many fields of science and technology, including the practical medicine. As shown by numerous...
Signals Features from Distributed Targets of Autodyne SRR with Simultaneous Pulse Amplitude and Linear Frequency Modulations
A mathematical model for signals description of the autodyne short-range radar (ASRR) with the simultaneous pulse amplitude modulation (PAM) and the linear frequency modulation (FM) is considered. The peculiarities of si...