Friction and Wear Behavior of Epoxy Composites Reinforced With Ipomoea Carnea Fiber under Dry Condition
Journal Title: International Journal of engineering Research and Applications - Year 2018, Vol 8, Issue 8
Abstract
This present paper depicts the effect of normal load on the wear (micron) and coefficient of friction of Ipomoea Carnea strengthened/reinforced epoxy composites with various weight % of fiber fraction (10%,20%,30%,40% wt). The dry sliding wear test was studied according to ASTM-G99 standard using Pin-on-Disc Tribometer manufactured by DUCOM Instruments Pvt. Ltd. To calculate the wear in micron and coefficient of friction of Ipomoea Carnea reinforced epoxy composites the pin of 12 mm diameter of given fiber composites were fabricated and tested under three different loading conditions (10N,20N,30N) for each fiber weight concentration. Friction and wear measurement was accomplished through load cell and LVDT respectively. The Pin-on-Disc Tribometer acquired real time data of wear, and coefficient of friction with time(sec). Each test were conducted for 10 min (600 sec) under dry condition and data for wear (micron) and coefficient of friction with variation of time (100 sec interval) were recorded from the monitor and graphs from obtained data were plotted in Microsoft excel.
Authors and Affiliations
Nitin Doifode, Prof. (Dr. ) Mukund Nalawade
Keywords
Related Articles
- EP ID EP395023
- DOI 10.9790/9622-0808012227.
- Views 136
- Downloads 0
A Bivariate Exponential distribution model for growth hormone response to repeated maximal cycle ergometer exercise at different pedaling rates.
In this paper, we introduce the bivariate exponential distribution model approach to probability modeling. Our results leads to exponential model characterization of many well known life time model to the development of...
Study On The External Gas-Assisted Mold Temperature Control For Thin Wall Injection Molding
Dynamic mold surface temperature control (DMTC) has many advantages in micro-injection molding as well as thin-wall molding product. In this paper, DMTC will be applied for the thin-wall molding part with the observation...
Access Control and Revocation for Digital Assets on Cloud with Consideration for Sharing
In cloud computing applications, users’ data and applications are hosted by cloud providers. With internet and cloud availability increasing numbers of people are storing their content on cloud. Also with presence of soc...
Hybrid Cuckoo-ABC Search: A comprehensive framework for vulnerability solutions in cloud computing
In the increase in cloud technology, data security became an concern over from application service (SaaS) to Infrastructure services (IaaS).As term virtualization, Vulnerability is one of the major concerns over Private...
Computation of Total Sediment load in River Osun, Southwestern Nigeria
Modeling of sediment transport can be used to solve environmental and water quality problems. Sediment transport rate hinge upon hydraulic flow, upstream sediment supply and bed composition. River Osun is a river in sout...