GEARING WITH INCREASED TEETH WEAR RESISTANCE
Journal Title: Проблеми тертя та зношування - Year 2018, Vol 79, Issue
Abstract
The most important criterions of gearing efficiency are teeth wear resistance. The or-der of synthesis of rack cutter instrument for manufacture of gears with increased teeth wear resistance is considered. It is based on the model of teeth wear of closed gearing that works in oil reservoir. The differential equation is derived; its solution determines geometrical parameters of original profile. The parameters depend on setpoint of comparative teeth wear of synthesizing gearing and involute gearing. The finding so-lution is used for creation of equation of working teeth surfaces in toothing.
Authors and Affiliations
P. TKACH, P. L. NOSKO, O. V. BASHTA, G. O. BOYKO, Iu. TSYBRII, O. GERASIMOVA
Keywords
Related Articles
- EP ID EP366594
- DOI -
- Views 65
- Downloads 0
INFLUENCE MOLYBDENUM ON THE CORROSION-MECHANICAL PROPERTIES OF CARBON STEEL WELDED JOINTS
The paper studies the impact of molybdenum on the corrosion and mechanical properties of welded joints of steel boiler. Found that the most high and stable toughness values and resistance to cracks and sulfide stress cor...
EVALUATION OF THE RESIDUAL STRENGTH OF STRUCTURAL CARBON PLASTICS IN THE PROCESS OF THEIR MOISTURE SATURATION, CHARACTERISTIC FOR OPERATING CONDITIONS
The nature of the moisture saturation of constructive skin carbon plastics is examined, as well as the effect of the previous static load and the process pressure of formation on the moisture content of the material. The...
ANALYSIS OF STRESS-STRAIN STATE OF HYDRAULIC MEMBRANE MECHANISM OF INGOT`S PULLING-OUT DRIVE FROM CRYSTALLIZER
A numerical simulation of the stress-strain state of the steel membrane of the hydraulic membrane mechanism is made. The range of values of membrane`s geometric parameters at the given membrane`s working resource and the...
THE DEFLECTED MODE OF METAL FRICTION ELEMENT OF DISC BRAKE (PAR TWO)
We’ve illustrated the deflected mode of solid rotor during braking and braking between the emergence and development of cracks on its surfaces. There were the following questions: features of the method of finite elemen...
INFORMATION TECHNOLOGY IN THE METHODS OF SOLVING QUALITY CONTROL TASKS OF COATINGS
The necessity of using information technology for optimal control of technological process of spraying. Describes the characteristics of the coatings, influencing their quality. Developed generalized indicators of the qu...