Generation, Morphology and Mineralogy of the Dust Particles from Off-Gas Blast Furnace
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 2
Abstract
In order to elucidate the morphology and mineralogy of the dust from blast furnace, the fundamental aspects of its generation process were studied. A dust generated by the dry dedusting step of the cleaning process for the BF off-gas was analysed by microscopy and chemical analyses. The results indicated that the shape of particles is predominantly non-regular. We established with approximation the main mineralogical compounds: hematite, magnetite, calcium ferrites, glass and silicate phases. These are in accordance with mineralogy of the feed materials charged into blast furnace and in correlation with the complex processes that are developed into specifical zones where the dust particles were generated. The properties of BF dust and its structural phases are discused in respect to the blast furnace processes, the temperature zones and the gas composition.
Authors and Affiliations
Anișoara CIOCAN, Florentina POTECAȘU, Liliana IVANCEA
Keywords
Related Articles
- EP ID EP655776
- DOI -
- Views 66
- Downloads 0
Recovery of Copper from Waste Cables Used in Electrical Applications
The recycling of copper cables wastes has as main objective the recovery of copper. The effectiveness of this operation is guaranteed by the following factors: infrastructure able to collect, select and sort these wastes...
Study of the Sintering Process of Iron Powders Coated with Nano-Hydrocarbon and the Resulting Microstructure at Temperatures up to 1200 °C
The objective of the research is development and study of a new ecologically friendly and technologically advanced method for introduction of carbon during sintering of low alloyed iron powders ASC 100.29. The method is...
Analysis of Titanium Interface and Tungsten Exterior Layer Thickness Coated by Vibrator Electrode Method
The goal of this paper is to create metallic materials with superior functional performances. The layer obtained by electrode vibrator method must have a very good adherence on part surface and a high chemical and therma...
Corrosion Behavior of Some Materials in 0.5M Ammonium Hydroxide Solution
The present work has the purpose of studying metallographic aspects and corrosion resistance of three materials used in ammonia stripping plants. The corrosion process was evaluated by gravimetric tests and potentiodynam...
Establishing the Constitutive Law of a CrMo Alloyed Steel
The paper shows the results of the researches for establishing the equation of the deformation behavior of alloyed steel with chromium and molybdenum. The behavior law is established in the experimental way, using the re...