Geometrical synthesis of spatial six-link guiding mechanisms
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 5, Issue 7
Abstract
<p><span lang="EN-GB">The study considers problems of geometric synthesis of spatial hinge-lever six-link mechanisms with linear displacement of the final link performing the guiding function. The variants of arranging the mechanisms and their design features to provide the maximum course of the final link with minimum lengths of levers have been found. The geometric parameters of the mechanism in its generalized form have been determined and specified the kinematics and layout schemes. The influence of geometric parameters and layout variants on the kinematic parameters of the mechanisms has been studied. Dependencies have been obtained to determine the geometric parameters of the basic mechanism by the specified course of the final link and the permissible angles of transmission in the hinges of the levers. Parametric dependencies are provided in the article to help calculate accurately the optimal geometry of the mechanism by the criterion for minimizing the lengths of the levers at acceptable transmission angles and the required range of displacements. A scheme has been proposed for calculating spatial dimensional chains for determining the shape of the parts. 3D modeling has revealed the variability of geometric parameters, which helped formulate layout versions of the mechanism. A technique for geometric synthesis has been developed and variants of spatial hinge-lever six-link mechanisms in dynamics have been modeled in accordance with this technique, which made it possible to show the features of the motion of the links.</span></p><span lang="EN-GB">The carried out research has determined possible ways of developing new variants of spatial hinge-lever six-link mechanisms, and it has opened new possibilities of their application as a guiding mechanism. The results of the research can be used in designing platforms for lifts, robot manipulators, machine tools, and in mechatronics</span>
Authors and Affiliations
Serhii Kliuchkovskyi, Myroslav Tykhan, Taras Repetylo, Yuriy Hirnyak
Keywords
Related Articles
- EP ID EP528197
- DOI 10.15587/1729-4061.2018.141816
- Views 52
- Downloads 0
Development of energy-saving technology to maintain the functioning of a wind-solar electrical system
<p>An integrated system to support the functioning of a wind-solar electric system has been designed, based on predicting a change in the capacity of a rechargeable battery when measuring voltage at the input to a hybrid...
Improvement of safety of autonomous electrical installations by implementing a method for calculating the electrolytic grounding electrodes parameters
We have solved the task of safety improvement in the grounding process of autonomous mobile electrical installations. Existing procedures for the calculation of normalized resistance of grounding electrodes in electric i...
Development of the procedure for forming nonstationary signal structures based on multicomponent LFM signals
<p>Noise protection of existing radio lines with noise-shaped signals and digital types of modulation was studied. Analysis has shown that the use of such signals in conditions of the radio-electronic conflict does not p...
Defining a criteria for the identification of a technique for producing tomato juice
<p>The basis of modern analysis of the quality of juice products is a matrix approach. The essence of the matrix approach is to define a series of parameters, which comprehensively characterize the composition of juices....
Segmentation of optical-electronic images from on-board systems of remote sensing of the earth by the artificial bee colony method
<p>It was established that it is not possible to apply the known methods of image segmentation directly to segmentation of optical-electronic images of on-board systems of remote sensing of the Earth. We have stated the...