Health impact assessment of exposure to PM10 in Ilam city using Air Q software
Journal Title: Journal of Advances in Environmental Health Research (JAEHR) - Year 2017, Vol 5, Issue 4
Abstract
Air pollution is a major environmental issue in the world that can be harmful for human health. The aim of this study was to determine the health impacts of particulate matter with an aerodynamic diameter ≤10μm (PM10) in Ilam in 2013 and 2014. The air pollution data were obtained from the Ilam Department of Environmental Protection. The data were analyzed by Excel software, and the annual mortality and morbidity due to cardiovascular and respiratory diseases attributed to PM10 exposure were estimated by AirQ software.According to the results, the average of annual, winter, and summer PM10 concentration was 68.1, 46.7, and 89.3 μg/m3, respectively, in 2013. In 2014, the average annual, winter, and summer PM10 concentrations were 51.4, 40.3, and 62.6μg/m3, respectively. The total mortality, cardiovascular mortality, respiratory mortality, and hospital admissions due to cardiovascular and respiratory diseases in 2013 were estimated at 89, 47, 9, 46, and 119 cases, respectively, and in 2014 they were estimated at 64, 33, 6, 33 and 85 cases, respectively. The results revealed that 9.6% of total mortality in 2013 and 5.8% total mortality in 2014 were associated with concentrations of more than 20 μg/m3 PM10 concentration. Therefore, it is concluded that exposure to PM10 can increase morbidity and mortality. Thus, urgent and substantial actions to deal with the adverse effects of particulate matters are found to be necessary.
Authors and Affiliations
Shima Tabasideh, Ataallah Vaisi, Ali Jafari, Reza Rezaee, Mahdi Safari, Gilas Hossieni, Roya Ebrahimi
Keywords
Related Articles
- EP ID EP425366
- DOI 10.22102/jaehr.2017.94719.1031
- Views 109
- Downloads 0
Acute toxicity of titanium dioxide nanoparticles in Daphnia magna and Pontogammarus maeoticus
Titanium dioxide nanoparticles (nTiO2) are the world's second most widely consumed nanomaterial and large quantities of this material enters the aquatic ecosystem annually. Therefore, understanding the effects of nTiO2 o...
Physical, chemical, and microbial quality of drinking water in Sanandaj, Iran
Drinkability of water is determined based on its physical, chemical, and microbial properties. Undesirable changes in these parameters could threaten the health of consumers. The present study aimed to assess the physica...
Investigation of potato peel-based bio-sorbent efficiency in reactive dye removal: Artificial neural network modeling and genetic algorithms optimization
Over the last few years, a number of investigations have been conducted to explore the low cost sorbents for the decontamination of toxic materials. Undoubtedly, agricultural waste mass is presently one of the most chall...
Determination of arsenic concentration and physiochemical characteristics of water samples from Babagorgor fountain
Since Babagorgorfountain in the Ghorveh city of Kurdistan province is located in the arsenic belt of Iran, to raise awareness about the quality of drinking water from this fountain the concentration of arsenic and other...
Disinfection byproducts in swimming pool water in Sanandj, Iran
The present study aimed to determine the concentrations of several disinfection byproducts (DBPs), including trihalomethanes (THMs), haloacetic acids (HAAs), and haloacetonitriles (HANs), in the public and private swimmi...