Heat and Mass Transfer by Hydromagntic Mixed Convection Flow along a Vertical Cylinder Embedded in a Non-Darcy Porous Medium with Heat Source
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
The problem of coupled heat and mass transfer by steady mixed convection flow of an incompressible, viscous and electrically conducting fluid along a vertical cylinder embedded in a non-Darcy porous medium with heat generation will be studied. The problem will be analyzed for the case of variable surface temperature and concentration. The entire region of the mixed convection is involved. The mixed convection parameter varies from pure natural convection to pure forced convection. The partial differential equations will be transformed into the non-similar boundary layer equations, which can be solved numerically by the finite difference method. From the present study, it can be concluded that rise in curvature and buoyancy ratio factors lead to higher heat and mass transfer. Heat and mass transfer drop as the inertia and square of Hartmann number rises. As Lewis number increases, Nussel number drops while Sherwood number rises. Increasing the heat generation parameter leads to lower Nusselt number. Sherwood number doesn’t affect when increasing the heat generation parameter.
Authors and Affiliations
Dr. Saddam Atteyia Mohammad
Keywords
Related Articles
- EP ID EP671643
- DOI 10.24247/ijmperdoct201916
- Views 83
- Downloads 0
New Recovery Energy Turnstile Achieved through Research and Innovation Eco-Design Method (EQFD)
The present paper focuses on the recovery of energy from the unitary passage of people inside the turnstiles. Positioned at strategic points such as stadiums, buildings and fairs, the turnstiles are objects that interact...
Design, Analysis and Fabrication of Solar PV Powered BLDC Hub Motor Driven Electric Car
Road transport has been dominated by petrol and diesel engines historically. Due to the environmental impacts and limited resources, both alternatives are unsustainable. The renewable energy directive, particularly ident...
Mode 1 Delamination Analysis and Its Comparative Study of Carbon/Epoxy, Graphite/Epoxy and Kevlar/Epoxy Composite Structures using Vcct in Ansys
In polymer composite materials manufactured using conventional hand layup technique is more prone to delamination. Delamination is one type of common failure observed in laminated composites. In present investigation del...
Adaptive Mechanisms for Reconfigurable Machines Based on Deformable Cam
This paper presents an innovative solution to make configurable an automatic machine based on a mechanical cam through the adoption of a cam with a flexible profile, controlled in a certain number of precision points by...
Theoretical Corroboration of the Selection Criteria of the Breaking-in and Shape-Copy Gear Teeth Grinding Methods
Peripheral grinding and disk grinding are commonly applied (without any theoretical justification) for the purpose of flat circular grinding and sharpening of cutting tools, respectively. In this work, the effectiveness...