HUMAN-ROBOT INTERACTION AND TRACKING USING LOW COST 3D VISION SYSTEMS
Journal Title: ROMANIAN JOURNAL OF TECHNICAL SCIENCES - APPLIED MECHANICS - Year 2012, Vol 57, Issue 2
Abstract
This paper describes a platform which allows humans to interact with robotic arms using augmented reality. Low cost “kinect” cameras (Xbox 360) are used for tracking human skeletons and locations of robot’s end effectors. The main goal of this paper is to develop robust trackers on this platform. Concretely, a Kalman filter is used for tracking robotic arms using data received from these sensors. It comes to finding a low cost platform for human-robot interactions.
Authors and Affiliations
Enrique MARTINEZ-BERTI, Antonio José SANCHEZ-SALMERÓN, Francesc BENIMELI
Keywords
Related Articles
- EP ID EP178696
- DOI -
- Views 79
- Downloads 0
A VIRTUAL INTERNAL BOND MODEL FOR HYSTERETIC MEDIA
In this paper, the properties of the hysteretic media are investigated via the virtual internal bond model (VIB) derived from the hyperelasticity with the integration of the 6–12 Lennard-Jones atomic interacting potentia...
HUNTING MOTION OF THE HIGH SPEED RAILWAY BOGIES WITH INTERCONNECTION AXLES
The axle hunting is a coupled lateral and yaw self-oscillatory motion which is largely determined by wheel-rail contact geometry. The stability of this motion is an important dynamic problem that determines the maximum o...
NUMERICAL SIMULATIONS OF NAKAZIMA FORMABILITY TESTS WITH PREDICTION OF FAILURE
This paper presents results of numerical simulations of the Nakazima test with determination of formability without using the forming limit curve. The onset of localized necking has been determined using the criterion ba...
HYSTERESIS IN THE SHAPE MEMORY ALLOYS
This paper discusses the hysteretic behaviour of a shape memory strip under uniaxial tension. The generalized play hysteresis operator is coupled with the exponential evolution law of 1D constitutive model of the shape m...
ANALYTICAL AND NUMERICAL STUDIES OF FORMABILITY OF METAL/POLYMER/METAL SANDWICH SHEETS
The aim of this study is to analyze formability of three-layer metal/polymer/metal sandwich sheets. For this purpose, forming limit curves (FLCs) of sandwich sheets with particular configurations were determined using tw...