Hydrothermal mode of the flowthrough reservoircooler with respect to its morphometric changes
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 10
Abstract
<p>We carried out hydrothermal investigations of the flow-through reservoir-cooler with running water of the thermal power plant. The purpose of the study was to investigate a degree of silting of the flow-through reservoir-cooler of TPP for the operation period and an effect of morphometric changes of RC on its temperature and temperature of circulating water. The peculiarity of the circulating water supply of this thermal power plant is that two channels carry out the discharge of circulating water into the reservoir ‒ to the tail part of it and to the head part, near the water discharge facility.</p><p>The volume of silting of the Dobrotvir reservoir during the operation period is 0.88 million m<sup>3</sup>, the total volume decreased by 9.6 %. The depths up to 2 m increased by 28 %. The area of the reservoir decreased by 1.56 km<sup>2 </sup>as a result of silting and overgrowth of coastal water area.</p><p>Circulating water in the near water area of its discharge into the reservoir cools by 3‒4 <sup>о</sup>С, that is, by ≈50 % of the total value. Over the operation period, the near water area became shallow, but this did not affect temperature performance of the reservoir.</p><p>We recommended the formula for forecasting a temperature of water discharged from flow-through reservoir to a river, which is important for the summer period. The discharge of circulating water for cooling by two channels ‒ to the upper and to the catchment water area of the flow-through reservoir-cooler increases its active area. It is possible to provide sanitary norms regarding the thermal pollution of the river below the reservoir-cooler by regulation of the discharge of deep layers of water by discharge facility in summer.</p><p>The results of research can be useful for operation of reversible systems of technical water supply with reservoirs-coolers. They are important for regulation of redistribution of circulating water of a thermal power plant to a water area of a reservoir-cooler, as well as for operation of their discharge facilities in flow-through reservoirs.</p>
Authors and Affiliations
Nikolai Bosak, Oleksandr Hvozdetskyi, Roman Hnatiiv
Keywords
Related Articles
- EP ID EP527922
- DOI 10.15587/1729-4061.2018.128064
- Views 68
- Downloads 0
Studying the loss of mass by cauliflower depending on agrobiological factors, varietal features, and package technique
<p>The aim of this study was to scientifically substantiate influence of weather conditions during vegetation season of cauliflower, the content of some components of the chemical composition, physical properties, as wel...
Study of microelement distribution uniformity in a bulk of dough enriched with dietary supplements
<p>The expediency of introduction of dietary supplements based on the chelate complex in food systems and ensuring uniformity of their distribution was substantiated. The objective was to elucidate uniformity of distribu...
Mathematical model of obtaining a hydrocarbon fuel based on the fischertropsch pathway in a stationary layer of the cobaltbased catalyst
<p>Studying the kinetics of the Fischer-Tropsch process is a rather important task, since this process is very sensitive to the temperature mode, as well as to the characteristics of the catalyst. In addition, a given pr...
Improving the diagnostics of underground pipelines at oilandgas enterprises based on determining hydrogen exponent (PH) of the soil media applying neural networks
<p>A set of key parameters and information flows has been formed to simulate stages of probing the outside surface of underground metal pipelines (UMP) taking into account pH of the soil contacting with the pipe metal.</...
Development of the algorithm for aircraft control at inaccurate measurement of the state vector and variable accuracy parameter
<p class="a0">A parametric method of the synthesis of control in the closed circuit, taking into account explicitly generalized error of the inertial module, is presented. The law of control in the form of analytical for...