IMPACT OF ADDING BIOPREPARATIONS ON THE ANAEROBIC CO-DIGESTION OF SEWAGE SLUDGE WITH GREASE TRAP WASTE
Journal Title: Civil and Environmental Engineering Reports - Year 2016, Vol 3, Issue 22
Abstract
The aim of the study was to evaluate the effect of using biopreparations on efficiency of the co-fermentation process. Commercial bacterial biopreparations DBC Plus Type L, DBC Plus Type R5 and yeast biopreparations were used in the study. The process of cofermentation of sewage sludge with grease trap waste from a production plant that manufactured methyl esters of fatty acids was analysed in the laboratory environment under mesophilic conditions. The sludge in the reactor was replaced once a day, with hydraulic retention time of 10 days. Grease trap waste accounted for 35%wt. of the fermentation mixture. The stabilization process was monitored everyday based on the measurements of biogas volume. Addition of yeast biopreparation to methane fermentation of sewage sludge with grease trap waste caused an increase in mean daily biogas production from 6.9 dm3 (control mixture) to 9.21dm3 (mixture M3). No differences in biogas production were found for other cases (mixtures M1, M2). A similar relationship was observed for methane content in biogas.
Authors and Affiliations
Małgorzata WORWĄG
Keywords
Related Articles
- EP ID EP243236
- DOI -
- Views 57
- Downloads 0
Modeling performance in reverse osmosis wastewater treatment post-trial coke in the integrated systems based on the assumptions of the relaxation model
The paper presents the results of studies on coking wastewater, coming from the coke plant "Koksownia Czestochowa Nowa" in two integrated systems associating coagulation volume and advanced oxidation with reverse osmosis...
Successfull urban regeneration project: Gdańsk-Letnica district case study
This paper presents the process of urban regeneration of Gdansk Letnica district, a project that from a very short time perspective can be described as successful. The paper will present a brief district’s history as wel...
A HYBRID METHOD OF DETERMINING DEFORMATIONS OF ENGINEERING STRUCTURES WITH A LASER STATION AND A 3D SCANNER
The article presents the technology and an analysis of results of engineering structure displacements and deformation measurements. Two measuring technologies using the TDRA65000 laser station from Leica and the FARO Foc...
Incineration of tannery waste in a tunnel furnace system
The leather industry generates significant amounts of waste for which there is not comprehensive treatment method. Such waste is mainly landfilled, which is an environmental threat. However, solid tannery waste could be...
Wastewater treatment in constructed wetlands
Constructed wetlands are an alternative and economically reasonable way for the wastewater from dispersed development treatment. Existing systems showed that the effectiveness of this treatment is high. The whole treatme...