Impact of the Mixture of Hexa(N-hydroxymethyl)amidocyclotriphosphazene and Partially Methylated Melamine Formaldehyde Resin on the Flame Retardancy of Paper
Journal Title: Fibres and Textiles in Eastern Europe - Year 2016, Vol 24, Issue 4
Abstract
The flame retardancy of the mixture of hexa(N-hydroxymethyl)amidocyclotriphosphazene and partially methylated melamine formaldehyde resin (HHMATP/PMMM) in paper was proposed by limiting oxygen index measurement (LOI), the vertical burning test and cone calorimetry test (CCT). In our research, the LOI of washed FR-paper could still be up to 33.5%; the after flame time , and burning time were reduced to 4.8 s & 0 s, and the char length was only 12.0 mm. While the results of CCT imply that compared with non-flame retarded paper, the heat release rate (HRR) of FR-paper with HHMAPT/PMMM increases gently; the mass loss becomes significantly slow, and the prolonged maximum heat release rate (PHRR), average heat release rate (MHRR), average effective heat of combustion (MEHC) and total heat release (THR) drop greatly. According to the experimental results, HHMATP/PMMM has not only excellent flame retardancy in paper but also good water resistance, with HHMATP/PMMM playing a flame retardant role mainly by means of the condensed phase mechanism.
Authors and Affiliations
Linsheng Tang, Jing Zhao, Xiaotong Sui, Hongbing Song, Wei He
Keywords
Related Articles
- EP ID EP164471
- DOI 10.5604/12303666.1201144
- Views 70
- Downloads 0
Proposing Probabilistic Operational Risk Assessment Model for Textile Industry Using Bayesian Approach
Accidents, operational failures and losses prompt authorities to highlight the importance of adequate systems and controls to deal with operational risk (OR). Therefore risk assessment methodology has become a dire need...
Digital Image Correlation Method in Monitoring Deformation During Geogrid Testing
wwdwdw<br/><br/>
Photometric Properties of Retroreflective Materials in Dependence on their Structure and Angle of Illumination
The purpose of high visibility products is to reflect light at a low angle towards the source, such as vehicle headlights. The article presents measurements of the photometric properties of selected retroreflective mater...
Corrosion Behaviour of CuSn- and CuZnNi-coated Polypropylene Nonwoven
The intended purpose of metallised nonwovens is architectural shielding against electromagnetic fields. Therefore the aim of this work was to systematically investigate the corrosion behaviour of metallic layer/polypropy...
Definition of Mass Spring Parameters for Knitted Fabric Simulation Using the Imperialist Competitive Algorithm
The 3D simulation of fabrics is an interesting issue in many fields, such as computer engineering, textile engineering, cloth design and so on. Several methods have been presented for fabric simulation. The mass spring m...