IMPACT TOUGHNESS OF HIGH-STRENGTH LOW-ALLOY STEEL WELDED JOINTS
Journal Title: Applied Engineering Letters - Year 2018, Vol 3, Issue 3
Abstract
Impact toughness of samples with three different relative positions of V-notch and multipass V- butt welded joint at high-strength low-alloy steel S690 are considered in this paper. The aim of this paper is to analyze the influence of material degradation due to welding to impact toughness of samples made of considered steel. Impact toughness was analyzed by experimental approach objected to including as many influential factors as it is possible. The main objective of impact toughness testing is to evaluate the influence of welding to overall load capacity and stability of welded mechanical construction made of high-strength low-alloy steels. Fully understanding of transformation processes provoked by welding of high-strength low-alloy steels and impact toughness testing as resulting property of those processes are crucial to perform integrity, safety and reliability analysis. This paper pointed out the necessity of analyzing the welded constructions on different dimension levels. Further investigations in this area have to be a continued through more quantitative analysis of welded joints which will, established precise analytical model of zones of welded joints, and furthermore, in involvement with adequate software, a complete evaluation of the experimentally obtained results. As experimentally obtained results of impact toughness that correlate to microstructure and microhardness distribution implicated that development of those steels must be followed with improving weld processes and development, adjusting and modification of the design.
Authors and Affiliations
Andreja ILIĆ, Lozica Ivanović, Blaža Stojanović, Danica Josifović, Eleonora Desnica
Keywords
Related Articles
- EP ID EP428068
- DOI 10.18485/aeletters.2018.3.3.3
- Views 78
- Downloads 0
EFFECT OF ALUMINA AND GRAPHENE ON MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF Al‐7075 HYBRID COMPOSITE
In this paper the combined effect of alumina and graphene reinforced with aluminum matrix by using stir casting methodology, was evaluated. Hybrid metal matrix composites gives combined results effect of different reinfo...
VIBRATION-BASED DAMAGE DETECTION OF BEAM-LIKE STRUCTURES USING DISCRETE WAVELET TRANSFORM
In this paper, a new modal parameters-based damage detection method has been proposed for accurate characterization of single and multi-surface cracks in beam-like structure. The advantage of this method is undamaged mod...
DEFORMATION RESPONSE OF DUAL PHASE STEEL IN STATIC AND DYNAMIC CONDITIONS
In this work, strength and plastic deformation effect of the dual phase steel are analysed in the static and dynamic conditions. Since the dual phase steel is extensively used in the outer body parts of the automotive ve...
ANALYSIS OF PROPERTIES OF THE FRP REBAR TO CONCRETE STRUCTURES
The application of the FRP (Fiber Reinforced Polymer) rebar is presented in this paper. The various kinds of fibers, depending on the types of the FRP rebar and types of matrix of FRP are listed. The main tasks of matrix...
MECHANICAL BEHAVIOUR OF SMALL LOAD BEARING STRUCTURES FABRICATED BY 3D PRINTING
3D printing is state‐of‐the‐art manufacturing technology. In addition to prototyping, the development of this technology allows the parts produced by this technology to be used as fully functional assemblies. There are d...