Implementation and Comparative analysis of Carry Select Adder using Kogge - Stone Adder in Adiabatic logic

Abstract

Most important design consideration in integrated circuit after power is speed. Adders are one of the basic fundamental components in any digital systems. Due to rapid growth in technology there is need for fast processing. Addition is a basic operation in any digital,analog or control system, fast and accurate operation of digital system depends on the performance of adder. The major problem for binary addition is the propagation delay in the carry chain. As the width of the input operands increases the length of the carry chain will be increased. To reduce the carry propagation problem most of the modern adder architectures are represented as a parallel prefix adder structure. Kogge stone adder is one among the parallel prefix adders. This has the regular layout which makes them attractive adder in electronic technologies. This paper proposes the design of Carry Select Adder using Kogge stone adder inadiabatic logic. Specifically Positive Feedback Adiabatic Logic (PFAL) is used;this design will have proficiency of energy saving by reusing the energy which helps in reduction of power dissipation. Hence a fast adder with low power dissipation is designed.

Authors and Affiliations

pallavi Sesham, venkatalakshmi Thota, kamaraju M

Keywords

Related Articles

Custom Angle Ceiling Fan

Custom Angle Ceiling fan can be used to regulate air flow only into areas where we need air flow, by changing the angles. (i.e.) both swiveling and tilting of the ceiling fan down-rod. The reason for the innovation of th...

A Comparative Analysis of a Solar Powered Dc Refrigerator and a Conventional Ac Powered Refrigerator

This Paper Presents A Comparative Analysis Of A Solar Powered Dc Refrigerator (A Tertiary Education Trust Fund Sponsored Project 2016/2017, The Federal Polytechnic Bida, Niger State) And A Conventional Ac Powered Refrige...

On the Mn-In-Ni Diatoms: Electronic Properties Depending on Spin Multiplicity

In this study, Ni, Mn and In atoms formed by different combinations of diatoms due to the spin multiplicity of electronic structure characteristics have been investigated. Calculations have been performed by Density Func...

The Analysis of Performance Measures of Generalized Trapezoidal Fuzzy Queuing Model with an Unreliable Server

The purpose of this research paper was to propose a method which can be utilized to determine the different types of performance measures on the basis of the crisp values for the fuzzy queuing model which has an unreliab...

Doubly Fed Induction Generator Based WECS With The Double Trap LLCL Filter For Harmonics Mitigation

The wind energy conversion system integrated with a doubly fed induction generator. The PWM based back-toback power converters produced harmonic and as well as the non-linear loads are also a contributor of harmonics. Fi...

Download PDF file
  • EP ID EP394378
  • DOI 10.9790/9622-0806032226.
  • Views 135
  • Downloads 0

How To Cite

pallavi Sesham, venkatalakshmi Thota, kamaraju M (2018). Implementation and Comparative analysis of Carry Select Adder using Kogge - Stone Adder in Adiabatic logic. International Journal of engineering Research and Applications, 8(6), 22-26. https://europub.co.uk./articles/-A-394378