Implementation of an analytical formulation for LEMP to assess the lightning performance of a distribution line

Journal Title: TecnoLógicas - Year 2018, Vol 21, Issue 42

Abstract

This paper presents the implementation of an analytical formulation to calculate the lightning electromagnetic pulse (LEMP) assuming a current wave-shape linearly rising with flat top and a transmission Line (TL) return-stroke model. It also describes the development of the expressions for the image dipoles required to calculate the vertical electric field, the azimuthal magnetic field and, specially, the horizontal electric field. The expressions to calculate the contribution of source dipoles were detailed in a previous publication by other authors. The complete formulation is used to calculate electromagnetic fields and lightning-induced voltages on a typical overhead distribution line. The results were compared with traditional formulas to calculate the LEMP (such as Rubinstein’s) and to calculate induced voltages (such as Rusck’s) showing errors below 1%. If a more complex wave shape was used (such as Heidler’s), errors below 5% were found. Additionally, the formula was employed to calculate the flashover rate of a distribution line above a ground with infinite and finite conductivity. Errors less than 5% were found compared to the results obtained in the IEEE 1410 Standard. On the other hand, the computation time required to the assessment of an overhead line indirect lightning performance is reduced by half when the analytical formula is used.

Authors and Affiliations

Edison Soto, Ernesto Pérez

Keywords

Related Articles

Optimal Power Flow for radial and mesh grids using semidefinite programming

This paper presents a convex formulation for optimal power flow (OPF) in both radial and meshed grids. A semidefinite programming (SDP) approximation transforms the quadratic non-convex model int...

AC transmission network expansion planning considering circuits repowering and location of capacitors

This paper deals with the Transmission Network Expansion Planning (TNEP) problem. The TNEP consists of finding a set of new circuits on a power system, which is needed to attend a future demand. In its classical version,...

Quasi-switched inverter using space vector pulse width modulation with triangular comparison for photovoltaic applications

This workanalyzes a prototype of a quasi-switched boost inverter (qSBI) feeding an isolated resistive load from a DC source. The use of spatial vector pulse width modulation (SPWM) with triangula...

Hydrophobicity study of kaolinite from La Unión, Antioquia

In this research three methodologies to convert the hydrophilic surface of kaolinite into a hydrophobic surface are proposed, this condition is required to recover this mineral by means of froth flotation. Taking into ac...

Integration of distributed energy resources in isolated microgrids: the Colombian paradigm

The electrification of rural or isolated areas coupled with increasing environmental concerns have promoted the emergence of Distributed Energy Resources (DER) and the operation by isolated microg...

Download PDF file
  • EP ID EP336613
  • DOI 10.22430/22565337.778
  • Views 116
  • Downloads 0

How To Cite

Edison Soto, Ernesto Pérez (2018). Implementation of an analytical formulation for LEMP to assess the lightning performance of a distribution line. TecnoLógicas, 21(42), 51-62. https://europub.co.uk./articles/-A-336613