Improvement of construction and technology of manufacture car suspension ball bearing
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2016, Vol 76, Issue 1
Abstract
The necessity of improvement of spherical articulated joints is proved on the example of a ball bearing of a forward suspension bracket of a car. The purpose of the work is to improve the design and technology of manufacturing the ball hinge of the car suspension to improve its operational capabilities by increasing the durability of the spherical tribosystem «ball finger–liner». The ways of increasing the durability of spherical articulated joints by design and technological methods were formulated. The main factors of influence on the process of wear of spherical tribosystem «finger-liner» were considered. Taking into account the existing experience and results of the conducted studies, a self-regulated ball joint with an elastic element of the original design was developed. On the basis of the kinematic scheme of sphere manufacturing, a device for turning the incomplete spherical surface of a finger of high accuracy was developed. For hardening of partial spherical surfaces by surface plastic deformation developed by static-pulse device, which provides the layer with a heterogeneous structure, required physical and mechanical properties and geometrically determined lubricant-retaining microrelief. The results of this work in future will be planned to generalize and used for the manufacture of competitive products that contains parts with incomplete spherical surfaces.
Authors and Affiliations
M. M. Kosiiuk, S. A. Kostiuk
Keywords
Related Articles
- EP ID EP255915
- DOI -
- Views 108
- Downloads 0
Study of the action of blast deck charge in rocky soils
Blasting (B) in the industry, including the mining extraction of minerals, are carried out mostly with the use of blasthole charges that systematically distributed on the block that is undermined, by individual groups. T...
The method for predicting the quality indices of space optic-electronic images of the visible wave band
The article develops the technique for predicting the quality of cosmic optoelectronic images of the visible range of waves. This technique takes into account the indicators that flow to the final quality of the image, w...
On the issue of automation the road objects visibility distance determining during road accident technical expertise
The problems of traffic accidents occurrence during the nighttime, problems determine the road subject visibility distance of under uncertainty and uncertainty of baseline data on existing methods are analyzed. The techn...
UWB antenna system for mobile bearing finder of radio and television stations
This research discusses the problem of development and manufacturing of the ultra-wideband (UWB) antenna element and antenna system on the basis of such element for mobile bearing finder of radio and television signals w...
Calculation of parameters of image receivers on CCD structures while aircraft survey of the earth surface
The article provides an analysis of the noise characteristics of optoelectronic image receivers on matrix photosensitive CCD structures with tape addressing and their influence on the resolution of optical-electronic ima...