Improvement of reliability of fire engineering equipment based on a jet-niche technology
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 2, Issue 8
Abstract
<p>The obtained results address the solution to problems on enhancing the reliability and operation efficiency of fuel consuming equipment at industrial and power engineering facilities in the course of low-cost modernization through the introduction of effective fuel combustion technology.</p><p>Using statistical methods of experiment planning, regression dependences of boundaries of the detachment work of burners were obtained. Solving the optimization problems for the derived functions made it possible to select the values of fuel distribution parameters for natural and liquefied gases with the purpose of decreasing the operation technical minimum of FE loading. As a result, possibilities of starting the equipment at gas pressure Р<sub>start</sub>=10 Pа were achieved and minimally possible workload of FE was decreased up to 5…10 % of the nominal, which corresponds to the coefficient of working load regulation K<sub>R</sub>>10. The presented results on improvement of starting characteristics of burners, as well as reserving of natural gas by liquefying will make it possible to ensure reliability of FE operation. A decrease in starting consumption minimizes the possibility of gas contamination of the furnace space (explosiveness) and decreases thermal intensity of FE elements, preventing the thermal «shock» on the heat exchange surface of the equipment.</p>
Authors and Affiliations
Michael Abdulin, Alex Siryi, Andrew Zhuchenko, Alexis Abdulin
Keywords
Related Articles
- EP ID EP527902
- DOI 10.15587/1729-4061.2018.126917
- Views 50
- Downloads 0
Development of a procedure for determining the basic parameter of aquatic ecosystems functioning ‒ environmental capacity
<p>Environmental capacity as the main parameter of functioning of aquatic ecosystems was studied. This parameter is an effective indicator of violation of structural and functional processes in the technogenically altere...
Studying the influence of structural-mode parameters on energy efficiency of the plough PLN-3-35
<p>Current research addresses improving the effectiveness of the technological process of tilling the soil for agricultural crops. Based on the experimental study into the technological process of plowing, we have determ...
Design of a recommendation system based on collaborative filtering and machine learning considering personal needs of the user
<p>The paper reports a study into recommendation algorithms and determination of their advantages and disadvantages. The method for developing recommendations based on collaborative filtering such as Content-Based Filter...
Study into the structuralphase transformations accompanying the resourcesaving technology of metallurgical waste processing
<p>The paper reports a study into the physical-chemical properties of a doped alloy obtained from reduction smelting. That was necessary to identify the parameters that reduce the loss of Ni and Cr when processing oxide...
A study of the effect of deposition conditions on the phase-structural state of ion-plasma WC – TiC coatings
<p>Studies of the influence of thermal and radiation factors on the elemental composition and phase-structural state of WC-TiC ion-plasma condensates of a quasibinary system are presented. As a thermal factor, we used di...