Increasing of leachate quality using an integrated aerobic membrane bioreactor
Journal Title: Journal of Advances in Environmental Health Research (JAEHR) - Year 2015, Vol 3, Issue 1
Abstract
The aim of this study was the increasing of leachate quality using integrated membrane bioreactor (MBR). The reactor was fed with treated leachate with overall 70-1360 mg/l chemical oxygen demand (COD). The analysis of COD, biochemical oxygen demand (BOD5), total suspended solids (TSS), and total dissolved solids (TDS) were performed in feed and filtrate, whenever the system reached steady state twice a week for 6 months. In all loading rate, BOD5 concentration was less than the standard limit. The removal efficiency of COD in all experiments was up to 80%. Up to 99% of solids, which may mainly include colloidal solids, were removed with micropore membrane. There was no significant difference between TDS concentration in feed and filtrate. It was concluded that MBR is a versatile technology with high throughput and can treat compost leachate below standard limit if used after appropriate processes.
Authors and Affiliations
Hassan Hashemi, Mahdi Safari, Asghar Ebrahimi, Abbas Khodabakhshi
Keywords
Related Articles
- EP ID EP420150
- DOI 10.22102/JAEHR.2015.40182
- Views 124
- Downloads 0
Macroinvertebrate diversity indices: A quantitative bioassessment of ecological health status of an oxbow lake in Eastern India
Aquatic macroinvertebrates, which play a significant role in the food chain of an ecosystem, are used in fresh water quality assessment to identify the environmental stress resulting from a variety of anthropogenic distu...
Long-term spatial and temporal variability of ambient carbon monoxide in Urmia, Iran
One of the pillars of epidemiologic research on the long-term health effects of air pollution is to estimate the chronic exposures over space and time. In this study, we aimed to measure the intra-urban ambient carbon mo...
Spatial distribution and analysis of heavy metal pollution in urban roadside dusts from Sanandaj, Iran
Industrial activities and high traffic density are the most important heavy metal pollution sources in urban areas. Roadside dust created by atmospheric deposition can be one of the best indicators for heavy metal contam...
Simulating green tax effects on pollution reduction, mortality and morbidity costs in Iran
The direct association between air pollution and morbidity and mortality rates has been proved. This major environmental risk factor has been mainly due to extensive use of fossil fuels. Increasing pollution caused by fo...
Temporal and spatial variation of drinking water quality in a number of Divandareh villages, Iran: With emphasis on fluoride distribution
Fluoride is found in all water resources at different concentrations and drinking water is the major source of fluoride exposure. Thus, because of the adverse effect of fluoride in low and high concentrations, the evalua...