Influence Analysis of Selected Turbine to Working Characteristics of Small Hydro Power Plants
Journal Title: Machine Design - Year 2018, Vol 10, Issue 1
Abstract
Small Hydro Power Plants (SHPPs) represent a very important renewable energy source and is becoming more and more expensive in the world. Unfortunately, this is not the case in our country. The choice of turbine SHPP is an extremely complex task because it has a decisive influence on the performance characteristics of the SHPP (efficiency, impeller power, average annual production of electricity, impeller RPM, dimensions, price,...). In this paper, the methodology for selecting the SHPP turbine is defined based on the most important parameters. The methodology has been applied to the specific location located on the Mlava River, but it is most important that it can be applied at any other location. At the end of the paper, conclusions and directions for further research is given.
Authors and Affiliations
Milan Vasić, Miloš Matejić, Mirko Blagojević
Keywords
Related Articles
- EP ID EP566858
- DOI 10.24867/MD.10.2018.1.11-16
- Views 120
- Downloads 0
Internal Geometry Optimization of Angular Contact Ball Bearings
Globally is known that cutting machine tools are challenged with increasing the performances as well as productivity, accuracy, product quality. All of these challenges are depend of various criteria, as is spindle set s...
Analysis of Roughness Parameters of the Tooth-Face of Model Hob Milling Tool
The surfaces of the tribo-mechanical elements of the machines through which mutual contact is realized are essentially thin layers of materials whose composition and properties differ significantly from the properties of...
Cutting Force Prediction for Three Types of Cutting Materials and Lathe Tool Holders
In this study the machining cutting forces is analysed. Experimental measurements are performed on the three types of the cutting tools and lathe tool holders in order to collect the experimental data. The method of ANFI...
Automatic Handling Equipment for Laser Cutting
The article is devoted to the presentation of the results of the research project Req-00163-003 entitled "Research of CNC technology nodes for cutting materials using energy-beam technologies". The aim of the project is...
Selection of Optimal Concept Solution for Preventing Wrong Fuel Using in Cars
Manufacturers have still not found an adequate solution to prevent misfueling, nor have they found a solution to prevent damage. Car manufacturers offer a very large number of technological innovations in cars, but they...