Influence Law of PBA Method New Station Closely Undercrossing Existing Station on Its Structural Deformation
Journal Title: Urban Mass Transit - Year 2024, Vol 27, Issue 6
Abstract
Objective A new station constructed with PBA method closely undercrossing existing station will influence the deformation of the latter′s structure. The influence law needs to be studied. Method Based on the project of Pingguoyuan Station on Beijing Metro Line 6 closely undercrossing the existing station, a finite element model is established by the GTS NX finite element analysis software, and its computing accuracy is verified through comparison with the actual monitored results. According to the calculation results of the finite element model, the impact of PBA (pile beam arch) method construction on the existing station is studied, and the influence of the existing station on land subsidence is analyzed. Result & Conclusion In the process of PBA construction, the construction stages that greatly affect the track structure and the building structure of the existing station are the guiding hole excavation and the second lining arch stages. The closer the construction is to the existing station, the smaller the land subsidence. When the monitoring sections are at the same location, the larger the existing station structure section, the smaller the land subsidence. With the same section size of the existing station, the closer to the excavation centerline of the new station, the greater the land subsidence value. The influence range of the existing station is related to the sectional size of the existing station structure.
Authors and Affiliations
Jiangtao TIAN, Zijie WANG
Keywords
Related Articles
- EP ID EP737765
- DOI 10.16037/j.1007-869x.2024.06.036
- Views 35
- Downloads 0
Optimization of Mecca Light Rail Train Organization during Peak Hours Based on Virtual Formation Technology
Objective With the annual increase of pilgrim flow in Mecca, the throughput capacity of Makkah Metro Pink Line (simplified as Mecca light rail) operation plan during peak hours is saturated. Therefore, it is aimed to exp...
Research on Intelligent Identification of Worker′s Unsafe Behavior in Urban Rail Transit Based on Convolutional Neural Network Algorithm
[Objective] Worker′s unsafe behavior is the fundamental factor in urban rail transit construction accidents. As the traditional management mode is insufficient in restraining the workers from the unsafe behavior, it is n...
Research on Construction Error Simulation of Rigid Catenary for 160 km/h Urban Rail Transit
Objective As construction error of the rigid catenary at 160km /h train speed affects the dynamic performance of the pantograph catenary, the technical parameters that meet the condition for the pantograph and rigid cate...
Control Technology for Anti-skid Protection in Urban Rail Transit Vehicles
[Objective] Anti-skid protection control technology is a crucial technology for urban rail transit. The control objective is to match the actual wheel-rail adhesion force by reducing braking force, thereby minimizing or...
Study on Mechanical Performance of Tunnel Interface between 3D Printed Lining and Surrounding Rock
[Objective] Research on and application of 3D printing technology in engineering structure construction are gradually deepening. Applying 3D printing in tunnel construction creates a new idea and approach. In the process...