Influence of Additives-Wastes of Chemical Industry Enterprises on the Properties of Reinforced Concrete in Transport Structures
Journal Title: Metallurgical and Mining Industry - Year 2018, Vol 10, Issue 1
Abstract
Abstract As a result of corrosion processes, crystals are formed inside the concrete, the growth of which leads to the occurrence of cracks and destruction of reinforced concrete transport structures. For the longterm protection of the reinforcement, low concrete permeability (dense structure) has been required. The denser the concrete, the better it resists penetration to the reinforcement of aggressive substances. In addition to the micropores, macropores can also participate in the corrosion of RCC, when defects in the form of cracks occur in the protective layer creating the effect of differential aeration. The experience of using the additive-plasticizer of coke-chemical production, which application will reduce the number of pores and capillaries, increase the strength, density, corrosion resistance of reinforced concrete is studied in the article. It has been experimentally established that the optimum amount of the additive is in the range between 0.6 ... 0.7% of the cement weight. The additive allows to save 5% of cement at achievement of the designed durability; reduces the vibration time of concrete mixture by 20 ... 30%; does not affect the quality of the concrete surface, does not lead to the bloating of temporary openings, provides the given strength and crack resistance of cement-concrete products, which allows to obtain reinforced concrete with high quality, reliability and durability.
Authors and Affiliations
Alexandra Doroshenko, Gennady Talavira
Keywords
Related Articles
- EP ID EP560909
- DOI -
- Views 115
- Downloads 0
Optimization of layer structure of sintering mixture composition in order to stabilize the thermal conditions during sintering
It was found that the thermal conditions of agglomerate sintering and the gas permeability of the charge layer depend on the segregation processes occurring in the layer of the feed material, which is due to the type of...
Choise of the production technology for the complex flux
Abstract As the complex flux is the promising material, there arises the necessity to determine the interaction between the lime-containing materials and iron-bearing ones at their joint sintering. We present in this art...
Optimization of chemical composition of steel for railroad wheels providing stabilization of mechanical and increase of operational properties
In connection with the increase in axle loads of freight cars on the railways and the increase of their speed of movement, the requirements to the service and operational properties of railway wheels, including wear resi...
Calculation of the temperature fields in mechanical seals for the oil centrifugal pumps
This article provides the calculation of heat distribution generated during dry sliding friction of the mechanical seals faces made of ceramic and ceramic-metal composites. The calculation was performed using the integra...
Ways of improving the units construction of hydraulic shock absorbers of passenger cars on the bogie of kvz-cnii type
Long-term operational experience, numerous theoretical and experimental studies show that the dynamic qualities of a passenger car are significantly influenced by the technical condition of hydraulic shock absorbers. Whe...