Influence of Atmospheric Conditions on the Mechanical Properties of Pet Rubber Composites
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2005, Vol 28, Issue 2
Abstract
The aim of paper is to study the influence of environmental open air conditions on the PET-rubber composites. Two set of samples (Type I, Type II) were obtained with the same composition, but the composites of Type I are random mixed while Type II are layered. These samples were obtained by compression molding for 45 minutes, working in a temperature domain of 180 °C-260 °C. The samples were left free in atmospheric conditions (at temperature between 3 °C- 30 °C, under sun light and rain) for two months. These samples were mechanicaly tested and aging was evaluated.
Authors and Affiliations
Cristina VLADUTA, Anca DUTA
Keywords
Related Articles
- EP ID EP664220
- DOI -
- Views 69
- Downloads 0
Improved Hardness and Tribocorrosion Properties of Nickel Coatings by Co-Depositing ZrO2 MicroSized Dispersed Phase During Electroplating Process
The tribocorrosion properties of ZrO2 – nickel microstrucured composite coatings have been studied in the following conditions: - Solution: 0.5M K2SO4; - Tribo corrosimeter: pin on disc connected with electrochemical c...
R.N.U.R. Method of Risk Assessment Based on Ergonomic Criteria. Case Study: Crane Maintenance Electrician
This paper presents a case study on the evaluation of a job (electrical maintenance) in AMG plant through a less used method in Romania, respectively Renault method, used especially in France. Means of work are analyzed...
X-Ray Diffraction Analysis at Ultrasonic Welding
In the article [2] the author present experimental investigations regarding of residual stress distribution in weld bead vicinity of submerged arc welded naval plates. In this way, residual stresses from vicinity of weld...
Studies and Research on the Production of TiO2 and TiN Thin Films by Assisted Physical Vapor Deposition Magnetron Process
The experimental research carried out in this paper aims at obtaining thin films of TiO2 and TiN and at characterizing them in terms of morphology, structure, transparency and electrical properties. The films were obtain...
Contributions Regarding the Development of New Types of Solar Actuators
The paper presents the authors’ contributions to the development of solar actuators with bimetallic band and Bourdon tube in the EMAD Research Centre of ”Ștefan cel Mare” University of Suceava. The solutions and the expe...