Influence of concrete technological damage at the moments of reinforced concrete beams cracking
Journal Title: Вісник Одеської державної академії будівництва та архітектури - Year 2017, Vol 1, Issue 67
Abstract
The aspects of managing the processes of composite building materials structure arrangement (CBM) including at different levels of heterogeneity are studied and are associated with changes in the qualitative and quantitative compositions of the cementing material. Scientists who previously dealt with the investigated issue are represented. The research task is defined, and it consists in the fact that it is necessary to determine the influence of structural factors on the change of the moments of bent reinforced concrete elements crack growth along normal sections. The factors were determined: the dispersion and the amount of filler. The physical meaning is revealed, it consists in estimating the specific length of surface cracks, manifested on a unit both in surface and in length. In determining the coefficients of technological damage of the beams, two lines were drawn on two sides of the beam: three vertical ones in the zone of simple bending, four inclined in the zone of joint action of the bending moment and transverse force- four inclined. The results of experimental and theoretical studies of the structural factors effect (the amount and disparity of the mineral dust) on the change of the moments of bent reinforced concrete elements crack growth along normal sections are presented. The analysis of technological damage influence on the moments of experimental beams fracture was carried out, and the regularity of the quantitative evaluation of technological damage was determined. The technique for determining the evaluation of technological damage is discovered. The diagrams of the dependence of the crack growth moments from the variable factors are constructed.
Authors and Affiliations
N. V. , Oliinyk, I. , Bichev, L. , Lukashenko
Keywords
Related Articles
- EP ID EP322946
- DOI -
- Views 129
- Downloads 0
From experience of preparation bases under clay soils of motorways and buildings with lime pilling
Techniques of bases improvement with weak water-saturated clay soils by compaction with the help of lime with the purpose of formation their necessary building properties piles are considered. Positive examples of lime p...
Determination of the influence of subway on the load-bearing structures of buildings with numerical methods
The article is devoted to numerical investigation of the vibration impact of subway on load-bearing structures of high-rise buildings. Parameters of the dynamic action of the rail transport (train, tram, metro) and the r...
Application of the ground penetrating radar method for the Ukrainian railways
The article analyzes the condition of the earth roadbed on the railways of Ukraine, the requirements for it and the methods of monitoring. The attention is paid to the importance of monitoring the state of railway infras...
The temperature limitations for cargo vehicles on Ukraine's motorways
In time of summer heat the temperature of road surface chemise can exceed bitum softening point. In this case cargo vehicles’ intensive current traffic results in road’s tearing away and rutting. During cold time the roa...
Using of deformation-strength model at calculation of normal sections of concrete and reinforced concrete elements by the first group of limited states
This work spotlights the main dependences, conditions and hypotheses of reinforced concrete structures calculation by the first group of limited states, i. e. at determining the strength of the normal cross sections of t...