Influence of elasticity of unbalance drive in vibration machines on its oscillations
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 5, Issue 7
Abstract
<p>The dynamics of the vibration machine with unbalance vibration exciter taking into account the elasticity of its connection with the asynchronous motor is studied.</p><p>The expression describing torsional oscillations of the elastic coupling in the steady (near-steady) operation of the vibration machine and the formula of the vibratory moment for the machine with plane oscillations of the working body are obtained. The amplitude-frequency characteristics of oscillations of the vibration machine drive using “soft” and “rigid” elastic couplings are constructed. It is shown that resonant oscillations can arise in the vibration machine drive. The nature of changes in the magnitude of the vibratory moment (additional dynamic load on the motor caused by oscillations of both the bearing body of the vibration machine and the elastic coupling), depending on the vibration exciter speed is determined. It is shown that the presence of the elastic coupling in the vibration machine drive in certain operation modes can lead to an increase in the motor load and promotes the appearance of the Sommerfeld effect during start-up. Critical frequencies of the vibration machine drive with unbalance vibration exciter are specified. Recommendations on the choice of natural frequencies of the drive in order to avoid resonant oscillations are formulated.</p><p>By means of computer simulation, the emergence of resonant torsional oscillations of the vibration machine drive during the passage of the natural frequency region and the associated manifestation of the Sommerfeld effect are demonstrated. The effectiveness of the proposed recommendations for reducing drive oscillations is confirmed.</p>The results obtained will allow avoiding resonant oscillations in the vibration machine drive, thereby reducing the dynamic loads in the elements of its design and increasing the reliability and durability of the drive parts
Authors and Affiliations
Nikolay Yaroshevich, Ivan Zabrodets, Sergii Shymchuk, Tetiana Yaroshevich
Keywords
Related Articles
- EP ID EP528198
- DOI 10.15587/1729-4061.2018.133922
- Views 67
- Downloads 0
Analytical estimation of inertial properties of the curved rotating section in a drill string
<p>We have proposed approaches to analytical assessment of the moment of inertia related to the curved rotary sections in a drill string. Research into rotation processes of the curvilinear sections in a drill string is...
Establishment of fire protective effectiveness of reed treated with an impregnating solution and coatings
<p>An analysis of techniques for determining the fire protective effectiveness of reed was performed; the need to develop reliable methods for studying the process of ignition and flame propagation around the surface of...
Results of experimental researches into process of oak veneer drying in the solar dryer
<p>A new design of solar drying plant with the active solar energy system is developed. It is proposed to use the K1-102 automated control system to diagnose the key parameters of air exchange in the solar dryer and to p...
Study into formation of nutritional value of cauliflower depending on the agribiological factors
<p class="a">We studied the effect of the sum of active temperatures above 10 °C, the amount of precipitation, and the hydrothermal coefficient (HTC), on the formation of dry, dry soluble substances, sugars, and ascorbic...
Development of the nanotechnology for wellness products “NatureSuperFood” fruit and vegetable icecream sorbets with a record content of biologically active substances
<p class="a">This paper reports the newly proposed and devised technique and nanotechnology for the wellness products “NatureSuperFood” ‒ fruit and vegetable ice cream – sorbets ‒ that make it possible to obtain a produc...