Influence of gas hydrates and concentration of corrosive components on the nature and speed of corrosion processes on pipelines
Journal Title: Вісник Тернопільського національного технічного університету - Year 2017, Vol 88, Issue 4
Abstract
According to the results of corrosion-mechanical tests for the first time the regularities of mutual action of mechanical stresses, concentration of chlorides and hydrate formation on the rate and localization of corrosion processes were established. The coefficients of influence of hydration formation for general and local corrosion were calculated, which make up 1,13 and 1,32, respectively, which confirms the hypothesis about the intensification of local corrosion as a result of hydrate formation.
Authors and Affiliations
Andrii Hrytsanchuk
Keywords
Related Articles
- EP ID EP280349
- DOI 10.33108/visnyk_tntu2017.04.056
- Views 46
- Downloads 0
Feasibility study of an auger conveyor performance of the haulm removing module
Nowadays, the available haulm removing machines and mechanisms do not fully meet the agronomic requirements for the process of harvesting roots. In this paper, the need to design new haulm removers and improve the availa...
Contact problem for punch of complex shape and preliminary stressed semi-space
Determination of contact stresses and deformations in the interaction of rigid and elastic bodies stamps with existing permanent deformations is one of the most actual tasks of modern construction and engineering. As it...
Forming of characteristic curve of high pressure sodium lamp by electronic ballast
The problems of reducing the influence of high pressure sodium (HPS) lamp resistance variations during the lamp aging on lamp power taking advantage of electronic ballast with open-loop structure is considered. The four...
Propagation of Lamb waves in a pre-stained compressible elastic layer interaction with a layer of an ideal compressible fluid
The problem of acoustic waves propagation in a pre-strained compressible elastic layer that interacts with a layer of ideal compressible fluid is considered. The study is carried out on the basis of the three-dimensional...
Analytical method for determining the stationary thermal fields in layered structures
The method of two-dimensional thermal stationary fields’ calculation in multilayer plates is proposed. Thermal fields are considered periodical along spatial value. The temperature of the upper and lower limits is descri...