INFLUENCE OF MACHINING ON QUALITY PARAMETERS OF OPTICAL METAL PRODUCTS
Journal Title: Fiability & Durability - Year 2017, Vol 19, Issue 1
Abstract
The article gives recommendations about the technological support of the given optical characteristics of metal products. The main task at providing light reflectance of surfaces is smoothing of roughnesses on a surface and providing surface cleanliness. The criterion of surface roughness and the work function of electrons have the greatest connection with the performance characteristics of optical metal products. The surface properties are determined by the double electric layer at the surface. Each subsequent stage of abrasive polishing should be carried out with a smaller grain size of an abrasive of not more than Rmax roughness, obtained in the previous stage.
Authors and Affiliations
SHKURUPY Valentin
Keywords
Related Articles
- EP ID EP232157
- DOI -
- Views 79
- Downloads 0
DETAILS OF OPERATIONS PERFORMED BY THE REMOTE CONTROL ROBOT (CONCEPT) TO THE HORIZONTAL FUEL CHANNEL DURING DECOMMISSIONING PHASE OF NUCLEAR REACTOR CALANDRIA STRUCTURE. PART II: INSIDE OPERATIONS
The authors contribution to this paper is to present a concept solution of a remote control robot (RCR) used for decommissioning of the horizontal fuel channels pressure tube in the CANDU nuclear reactor. In this paper t...
GLASS FIBERS – MODERN METHOD IN THE WOOD BEAMS REINFORCEMENT
One of the defining goals of this paper is getting new resistant material which combine the qualities of basic materials that get into its composition but not to borrow from them their negative properties. Specifically,...
DETAILS OF OPERATIONS PERFORMED BY THE REMOTE CONTROL ROBOT (CONCEPT) TO THE HORIZONTAL FUEL CHANNEL DURING DECOMMISSIONING PHASE OF NUCLEAR REACTOR CALANDRIA STRUCTURE. PART I: OUTSIDE OPERATIONS
The authors contribution to this paper is to present a concept solution of a remote control robot (RCR) used for the horizontal fuel channels pressure tube decommissioning in the CANDU nuclear reactor. The authors highli...
CONSIDERATIONS ON CONTACTLESS ELECTROMAGNETIC MEASUREMENT OF HUMIDITY IN PEDOLOGY
To put into practice the conventional determination of resistivity by the galvanic method, requires a relatively large amount of labor and is, therefore, expensive. At the basis of any interpretation are the lateral or v...
PRACTICAL METHOD FOR DETERMINING THE DYNAMIC COEFFICIENT
In practice collision is between two bodies, one which is carried kicking and moving, and another is hit and is at rest. There were obtained by shock request. The number of times the dynamic coefficient are greater effec...