Influence of Metal Fibre Content of Blended Electromagnetic Shielding Fabric on Shielding Effectiveness Considering Fabric Weave
Journal Title: Fibres and Textiles in Eastern Europe - Year 2015, Vol 23, Issue 4
Abstract
There are few researches reported about the influence of the metal fibre content of blended electromagnetic shielding (EMS) fabric on shielding effectiveness (SE) under different fabric parameters. In order to scientifically describe the metal fibre content of blended EMS fabric considering the fabric structure, in this paper two new indicators of structure metal fibre content (SMFC) and structure equivalent thickness (SET) were constructed according to fabric structure parameters of weft and warp density, yarn density and yarn metal content. A number of experiments were designed and sixteen groups of samples prepared to explore the influence of the two indicators on the SE. Firstly the SMFC and SET of the samples were calculated by the equations of the new indicators. SE values of the samples were then tested by the waveguide method. Finally the relations between the new indicators and the SE were analysed according to experimental results and electromagnetic wave theory. Results show that the SMFC and SET can scientifically describe the metal fibre content of the blended EMS fabric. The SMFC and SET show positive growth along with the SE while other parameters remain unchanged. For the basic weave, SE values are an approximate equivalence as long as the total densities are the same as the yarn density and fibre content of the yarns is the same. As the SMFC is consistent, the more floats, the lower the SE. The research in this paper can provide an important reference for the design, testing and production of blended EMS fabric.
Authors and Affiliations
Zhe Liu, Yongheng Zhang, Xing Rong, Xiuchen Wang
Keywords
Related Articles
- EP ID EP69012
- DOI -
- Views 95
- Downloads 0
Environment Friendly Approach to Simultaneously Remove Unfixed Dyes from Textile Fabric and Wash-off Liquor
A new idea was investigated in this study wherein the use of coagulants was assessed in the wash-off process to simultaneously remove unfixed reactive dyes from fabrics and washoff liquor. At the end of dark shade dyeing...
Social media w procesie ewolucji marketingowej w polskich przedsiębiorstwach sektora tekstylno–odzieżowego
Przemysł lekki wciąż stanowi jedną z ważniejszych dziedzin gospodarki światowej, w tym również w Polsce, determinując kierunki rozwoju poszczególnych regionów z nią związanych. Rozwój nowych mediów przyczynił się jednak...
Sensitivity of the Heat and Mass Transport System Within Neonate Clothing
The global model of heat and mass transport is determined by means of the heat balance with a term describing evaporation of sweat. Heat is supplied by metabolic heat production and lost by means of different phenomena w...
Metoda projektowania struktury zintegrowanego czujnika temperatury wbudowanego w tkaninę
Dla uzyskania hybrydowego elementu pomiarowego opracowano taką strukturę tkaniny aby móc umieścić w niej czujniki temperatury. Wielowarstwową tkaninę poddano odpowiedniej obróbce termicznej umożliwiającej zamocowanie czu...
Ballistic Behaviour of PACVD-Modified Textiles
A comprehensive study was performed using the Plasma Assisted Chemical Vapour Deposition (PACVD) modification of ultrahigh molecular weight polyethylene (UHMWPE) fibrous composites and paramid fabrics with the deposition...