Influence of Operating Conditions on Structure and Physical Properties of Polymeric Materials
Journal Title: Фізика і хімія твердого тіла - Year 2017, Vol 18, Issue 2
Abstract
The changes of structure and physical properties of polymeric materials that exploited in a long time with complex mechanical loads used in pipe systems for high-pressure cold water have been studied. A significant reduction in mechanical properties of polymeric materials has been established. The most typical structural defects that occur in polymer materials during manufacture and in the exploitations, using electron microscopic studies identified.
Authors and Affiliations
N. I. Domantsevych, O. V. Shunkina, B. P. Yatsyshyn
The CompositeNickel Hydroxide/Activated Carbonas Electrode Material in theBattery Storage Devices
The paper presents the results of studies of the structure and electrochemical properties of composite β-Ni(OH)2/C. It is shown that the diffractograms composite sintered β-Ni(OH)2/C in addition to peaks characteristic N...
Surface Layers and Thermoelectric Properties of Thin Films of Tin Telluride
The thermoelectric properties of tin telluride films obtained by vapor condensation on the high vacuum on ceramics and mica substrate are researched. Based on a two-layer Petritz’s model defined electrical parameters of...
Chemical and Mechanical Polishing of Cd1-xMnxTe by Solutions Based on H2O2–HI–Citric Acid
UThe process of chemical and mechanical polishing CdTe and Cd1-xMnxTe (0.3 <x <0.5) solid solutions by the solutions HI–H2O2–citric acid has been established. There is investigated the influence of the nature of the visc...
Strength of the Carbon Nanotube Films
The strength of nanodevices is caused by the interatomic distance decreace in nanostructures.Graphene nanofilm has 35 times larger strength than the steel. Thin whisker crystals grown from the gas phase are ten times mor...
The Thermoelectric Solar Generator
Developed a comprehensive system for generating of electric energy “Thermoelectric generator – solar collector”. The Sb doped PbTe (n-type of conductivity) and triple compound PbSnTe (p-type of conductivity) were synthes...