Influence of storage duration and density of raw cotton on the mechanics of the interaction process between feeding rollers in the cleaners of large impurities
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 3, Issue 1
Abstract
<p>We have examined influence of storage duration and the density of cotton in bale on the adhesion between impurities and cotton. We found the effect of raw cotton storage, as well as the fiber, in a compacted state, which contributes to the more rapid penetration of weedy particles into the material. For raw cotton stored in a bale for 1 month, with a density of 150–200 kg/m<sup>3</sup>, the elements of large impurities interacted with fiber at an effort of 63–91 sN/g for leaf, stem, and bract; for small impurities – 714–1,000 sN/g. Upon cleaning, when only small impurities remain, this effort increased to 714–1,053 sN/g. These data correspond to the raw cotton of grade I. For grade III, the force of adhesion is slightly different: for large impurities – 76–96 sN/g, for small impurities – 714–1,267 sN/g; after cleaning – 857–947 sN/g.</p><p>In a three-month storage in bale at a density of 250–300 kg/m<sup>3</sup>, the degree of interaction between impurities and fiber for the cotton of grade I was 109–137 sN/g, for grade III – 103–175 sN/g for large impurities. We have developed a technological mode that determines the multiplicity of cleaning; we also proposed a method for determining the spreading efforts that act on the feeding rollers and which are one of the most important factors for the process energy intensity. We analyzed the mechanics of the interaction process between a feeding roller blades and the transported layer of raw cotton. The results of research allow us to choose the required mode in the process of raw cotton cleaning from weedy impurities.</p>
Authors and Affiliations
Fazil Veliev, Rahib Sailov, Nurlana Kerimova, Tarana Safarova, Mətanət İsmailzade, Elmar Sultanov
Keywords
Related Articles
- EP ID EP527957
- DOI 10.15587/1729-4061.2018.132493
- Views 64
- Downloads 0
Influence of the alloy composition on determining the millesimal fineness of gold by X-ray fluorescent and assay analysis
<p>The conducted studies revealed the influence of the methods of cupellation and the XFA on the accuracy of determining the millesimal fineness in the system of the assay control. The effect of the alloy composition of...
Аnalysis of operating modes of singlephase currentsource rectifier with rectangularstepped pulsewidth modulation
<p>The operating modes of the single-phase active current-source rectifier in the case of rectangular-stepped pulse-width modulation and load in the form of DC traction motor are investigated. The single-phase bridge rec...
Optimal performance of 16-bit acyclic adders of binary codes
<p>The conducted studies established the prospect for enhancing the performance of computing components, specifically, combinational 16-bit adders, based on the use of the principles of computation of digital signals of...
Improving a resourcesaving surfacing technology using two ribbon electrodes with a controlled transfer of electrode's metal
<p>This paper reports results of research into a resource-saving technology of surfacing with two ribbon electrodes with a controlled transfer of the electrode's metal from the end sides of ribbon electrodes and with an...
Application of piecewisecubic functions for constructing a Bezier type curve of C1 smoothness
<p class="a">We have proposed and implemented a new method for constructing a spline curve of third degree, which possesses the properties of both a cubic spline and the Bezier curve. Similar to building the Bezier curve...