Influence of Strain Rate and Temperature on the Visco-Plastic Properties of Commercially Pure Titanium and Ti6Al4V Titanium Alloy
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2015, Vol 6, Issue 2
Abstract
The paper presents results of tests concerning visco-plastic properties of commercially pure titanium and Ti6Al4V titanium alloy. The analyses were carried out at wide range of strain rates from 2 x 10[sup]-4[/sup] s[sup]-1[/sup] to 2 x 10[sup]3[/sup] s[sup]-1[/sup] using servo-hydraulic testing machine and Hopkinson bar at quasi-static and dynamic range of loadings, respectively. The influence of temperature on the compressive curves was determined within the range of temperatures from 23°C to 400°C applying Hopkinson bar equipped with temperature chamber. Taking into account obtained results, the coefficients of Johnson–Cook (JC) constitutive model were calibrated. Mechanical investigations were accompanied by microstructural analysis in order to determine influence of temperature and rate of deformation on the plastic deformation mechanisms.
Authors and Affiliations
Wojciech MOĆKO
Keywords
Related Articles
- EP ID EP63062
- DOI -
- Views 99
- Downloads 0
Koncepcja zautomatyzowanego systemu obrony przeciwlotniczej rozproszonej baterii lub dywizjonu armat 35 mm
W artykule przedstawiono koncepcję zautomatyzowanego systemu obrony przeciwlotniczej rozproszonej baterii lub dywizjonu armat 35 mm realizowaną w ramach projektu rozwojowego na lata 2009-2011. Efektem końcowym realizacji...
Position Project to Study Selected Characteristics of the Optoelectronic Heads in RobotStudio
In the article, a project of robotized positions to study optoelectronic heads in the RobotStudio environment was presented. The authors suggested to use industrial robots in order to simulate movement of the head holder...
The Impact of Damage to the Compressor on the Operating Parameters of the Pratt & Whitney 206B2 Turbine Engine
The article presents the impact of damage to the centrifugal compressor of the P&W 206B2 turbine engine, built in the EC-135p2 helicopters EC-135p2. The damages are caused by sucking the foreign bodies to the inlet, what...
Symulacja przepływu gazodynamicznego wywołanego wypływem powietrza wypychanego z lufy przez pocisk
W artykule przedstawiono wyniki symulacji numerycznych wypływu powietrza wypychanego z lufy w wyniku ruchu pocisku podczas strzału na podstawie parametrów przepływu powietrza w lufie przed pociskiem. Stanowi to pierwszy...
Ballistic Analysis of Polish Low-Vulnerability Gun Propellants
One direction of modern artillery ammunition development is to reduce its vulnerability to the effects of mechanical and thermal factors during transport, storage and operation. For LOVA, the reduced vulnerability of pro...