INFLUENCE OF THE RESPIRATORY SIGNAL IN HEART RATE VARIABILITY ANALYSIS IN THE RESPIRATORY PATTERN IN HEALTHY ELDERLY AND WITH COPD
Journal Title: INTERNATIONAL JOURNAL OF ENGINEERING TECHNOLOGIES AND MANAGEMENT RESEARCH - Year 2018, Vol 5, Issue 10
Abstract
Motivation/Background: Cardiorespiratory interaction is known to cause a peak in the heart rate variability (HRV) spectrum, characterized as sinus arrhythmia. This study evaluates standard indexes of HRV spectral analysis with and without the influence of respiratory signal in elderly subjects with chronic obstructive pulmonary disease (COPD, N=14) and healthy lungs (N=14). In the last, all subjects controlled their breathing at 0.1 Hz (CGL) and breathed freely (CG). Method: Anthropometrical characteristics were similar, with increased heart rate in COPD (75±11.1 vs. 62±8.3 bpm). Cardiac and respiratory signals in supine position were recorded with a portable data acquisition system during 5 min and processed in frequency domain. To remove the influence of the respiration in HRV, a 2th order Butterworth band-stop filter, was applied to the RRi signal. Results: In CGL main respiratory frequency was significantly lower (ANOVA with post-hoc Turkey's test, α = 0.05) and with the influence of respiratory signal differed from without the influence of respiratory signal to HRV spectral analysis (Student t-test, α = 0.05) with increased low frequency contribution (51.0±11.4 vs. 42.0±11.6, respectively). PG and CG showed no significant differences in with or without influence of respiratory signal to HRV spectral analysis. Conclusions: The results of the present study have showed a low frequency respiration at 0.1 Hz provided an increase in low frequency and decrease in high frequency power spectral analysis, showing an error in the HRV analysis.
INVESTIGATION OF FLASHOVER VOLTAGE FOR EPOXY COMPOSITES FILLED WITH VARIOUS FILLERS
Minerals fillers such as Magnesium Oxide (MgO), Alumina Trihydrate (ATH), Calcium Carbonate (CaCo3), and Silica (SiO2) were used to produce epoxy composite for high and medium voltage in electrical application. Effects o...
A SFPM METHOD FOR INDIAN AUTOMOBILE RANGE PLATE RECOGNITION
Automobile range plate recognition is a challenging task in cyber crime. The numbers are stated of being in the automobile range plate, that is different shape and pattern in different countries. In India the automobile...
DESIGN OPTIMIZATION FOR WEIGHT REDUCTION OF LOCOMOTIVE WHEEL USING RESPONSE SURFACE METHODOLOGY
Manufacturing cost of locomotive wheel largely depends on mass of locomotive wheel and to reduce mass of wheel, design optimization is necessary. In this research the design of locomotive wheel is optimized considering h...
SUSTAINABLE MANUFACTURING CONCEPTS: A LITERATURE REVIEW
Purpose – The purpose of this article is to review of literature on Sustainable Manufacturing Concepts. Method – Several frameworks are explored and discussed. Articles on the subject were searched and retrieved, and a c...
INFLUENCE OF THE RESPIRATORY SIGNAL IN HEART RATE VARIABILITY ANALYSIS IN THE RESPIRATORY PATTERN IN HEALTHY ELDERLY AND WITH COPD
Motivation/Background: Cardiorespiratory interaction is known to cause a peak in the heart rate variability (HRV) spectrum, characterized as sinus arrhythmia. This study evaluates standard indexes of HRV spectral analysi...