INFLUENCE OF THE TEETH NUMBER ON THE GEAR MODULE VALUE AND LOAD CAPACITY OF GEAR PAIR IN UNIVERSAL HELICAL GEAR DRIVES
Journal Title: Applied Engineering Letters - Year 2018, Vol 3, Issue 1
Abstract
The basic parameters of the universal gear drives, except the axis height, are not defined by the standard, so the manufacturers of universal gear reducers can define them in their way. Most of the manufacturers followed the parameter values of universal gear reducers of leading world producers in order to ensure their interchangeability and the better positioning of their gear units at the market. This paper deals with the analysis of the influence of the gear pair teeth number on the size of the module, as well as on the load carrying capacity of single-stage universal gear units. For defined gear ratio values, different combinations of teeth number of pinion and driven gear were selected. Further, it was made calculation of the basic geometric dimensions of the gear pair, as well as the load capacity.
Authors and Affiliations
Milan Rackov, Mirko Blagojević, Siniša Kuzmanović, Miloš Matejić, Ivan Knežević, Maja Čavić
Keywords
Related Articles
- EP ID EP283257
- DOI 10.18485/aeletters.2018.3.1.4
- Views 79
- Downloads 0
IMPROVED WEIGHT FUNCTIONS FOR STRESS INTENSITY FACTORS OF SEMI ELLIPTICAL CRACK IN STEAM TURBINE ROTOR SYSTEM
This paper presents weight function approach with piece wise polynomial interpolation function to determine the stress intensity factors at the surface and deepest points of a semi elliptical crack induced at the blade m...
CHARACTERIZATION OF PRECIPITATES FORMED IN THE ALUMINUM ALLOY WITH ANTIMONY
The aim of the article was to identify and characterize the precipitates formed in the aluminum alloys with the addition of antimony. The performed investigation was on the casting aluminium alloy based on ENAC-AlMg5Si2M...
DESIGN OF WATER HAMMER CONTROL STRATEGIES IN HYDROPOWER PLANTS
Hydropower plants play an important role in the growth of the renewable energy sector. The main objective of the paper is to present, discuss and assess critical parameters which may cause unacceptable water hammer loads...
DETERMINATION OF CRITICAL SIZE OF CORROSION PIT ON MECHANICAL ELEMENTS IN HYDRO POWER PLANTS
Researchers in the field of fracture mechanics, predominantly developing appropriate solution algorithms for problems of solid bodies with cracks. Problems in mechanics generally, related with fracture and fatigue for so...
POLE ASSIGNMENT FOR GLASS CAPILLARY TUBE DRAWING PROCESS BY USING MATLAB AND MAPLE LANGUAGE
The question of pole placement for glass capillary tube drawing process is considered. It is used a frequency domain approach to an arbitrary finite spectrum assignment for multivariable time delay systems in order to co...