Influence of Twin-Screw Extrusion on The Dispersion of Nanoclay in Vinylester Composites

Abstract

This paper reports the dispersion of nanoclay in vinylester using co-rotating twin screw extrusion and ultrasonication for preparing nanoclay/vinylester gel coat. Two sets MMT/vinylester specimens, namely Type 1 and Type 2 were prepared for comparative studies. While Type 1 specimens were prepared using ultrasonication only, Type 2 specimens were prepared using both ultrasonication and twin-screw extrusion. Type 2 specimens showed lower levels of nanoclay intercalation and higher levels of exfoliation.  By using the MMT/vinylester gel coat so prepared by the two different routes, MMT/vinylester/glass specimens were fabricated and tested for mechanical properties. Type 2 based nanocomposite specimens showed greater values of ultimate tensile strength, flexural strength, interlaminar shear strength and impact strength. Scanning Electron Micrographs (SEM) of tensile fractured Type 2 based specimens showed less agglomeration of nanoclay than that of Type 1 based specimens.

Authors and Affiliations

Bommanna K, Radha H R, Yuvaraja Naik, Mahendra K V, A Hareesh

Keywords

Related Articles

Fitting and Forecasting of Trend Models for the HYV Boro Yields of Dinajpur District

Bangladesh is a densely populated country and the main food of the country is rice. Although the High Yielding Variety (HYV) Bro rice is being cultivated in almost all areas of Bangladesh it is enormously cultivated in D...

Calibration of a Manual Cone Penetrometer using a Digital Penetrologger

Cone penetrometers standardized by American Standards for Agricultural Engineering (ASAE) have been major instruments for investigating and quantifying soil compaction. However, the continuous use of penetrometers often...

Extent of Typhoon Ulysses Flooding and Flood Risk Management Interventions of Heavily Affected Households in Isabela Province, Philippines

The study assessed the extent of typhoon Ulysses flooding and the flood risk management interventions of heavily affected households in Isabela Province. A total of 3,000 respondents were selected through quota sampling...

A Systematic Review of Sentiment Analysis from Bengali Text using NLP

Sentiment Analysis (SA) is the method of studying a person’s comments and statements through computational means. It is a sub-domain of Natural Language Processing. A sentiment analysis (SA) system is created by traini...

An Analysis of the Morphological Changes of Surma River in Sylhet District Using Multitemporal Remote Sensing Images

The Surma River is one of the most important rivers in the northeastern part of Bangladesh, which has changed significantly throughout history. Very few studies have taken place to understand this river's complex behavio...

Download PDF file
  • EP ID EP709056
  • DOI https://doi.org/10.54536/ajaset.v5i2.101
  • Views 62
  • Downloads 0

How To Cite

Bommanna K, Radha H R, Yuvaraja Naik, Mahendra K V, A Hareesh (2021). Influence of Twin-Screw Extrusion on The Dispersion of Nanoclay in Vinylester Composites. American Journal of Agricultural Science, Engineering, and Technology, 5(2), -. https://europub.co.uk./articles/-A-709056