Integrations of Seismic Data, Petro-physical Evaluation and Reserve Estimation in Fimkassar Oil Field of Eastern Potwar, Pakistan
Journal Title: American Journal of Engineering and Applied Sciences - Year 2017, Vol 10, Issue 2
Abstract
Abstract In upper Indus basin Potwar plateau is a successful exploration area for hydrocarbon. The study area is consisting of Fimkassar oil field and research data is obtained from Land Mark Resources with the special permission of Director General of Petroleum Concession Ministry of petroleum and natural resources Islamabad. The study area consists of well#1 and #2 and seismic lines 97-CP-07, 782-CW-23, 782-CW-25, 884-FMK-101, 884-FMK-102, of the Fimkassar oil field. The 2D seismic study is very essential for interpretation of the subsurface structure clarity in the study area and occurrence of hydrocarbon in deeper horizon of sedimentary basin. The interpretation will be carried out to confirm the reservoir characteristic of the Chorgali Formation to delineate promising location for test drilling into Chorgali Formation. The methodology adopted to achieve the reserves estimation includes the measurements for the shale volume by using Gamma Ray Log, Porosity by density and Neutron Log, Resistivity of water by using SP method, Saturation of water in the zone of reservoir and Hydrocarbon saturation using Archie equation. Time structure maps of the reflectors will be produced using two-way time of the reflectors. Time structure map is converted into depth contour map and get area for reserve estimation. Applying the volumetric method to calculate reserve in Fimkassar area. Copyright © 2017 Muhammad Ishfaque, Hafeez Ur Rehman, Bilal Khalid, Syed Habib, Umair Fakhar and Sudip Chakarborti. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
Authors and Affiliations
Muhammad Ishfaque, Hafeez Ur Rehman, Bilal Khalid, Syed Habib, Umair Fakhar, Sudip Chakarborti
Keywords
Related Articles
- EP ID EP194541
- DOI 10.3844/ajeassp.2017.312.326
- Views 90
- Downloads 0
Gas Atomization of Molten Metal: Part I. Numerical Modeling Conception
Gas Atomization of Molten Metal: Part I. Numerical Modeling Conception Genaro Pérez-de León, Vincent E. Lamberti, Roland D. Seals, Taher M. Abu-Lebdeh and Sameer A. Hamoush DOI : 10.3844/ajeassp.2016.303.322 American J...
A Review on Cognitive Radio for Next Generation Cellular Network and its Challenges
Abstract Cognitive Radio (CR) is considered an intelligent technology. It improves the utilization of the radio spectrum. The increasing number of new devices has resulted in growing congestion of the ISM bands. FCC iss...
Measuring Hydraulic Conductivity Using Geotechnical Centrifuge
Measuring Hydraulic Conductivity Using Geotechnical Centrifuge Nur Aishah Zarime and Wan Zuhairi Wan Yaacob DOI : 10.3844/ajeassp.2017.878.881 American Journal of Engineering and Applied Sciences Volume 10, Issue 4...
Impact of Building Function on Thermal Comfort: A Review Paper
Abstract One of the most problems for achieving thermal comfort in buildings is disregarding the impact of different types of building use. They are differ depending on the activity style they perform inside. In residen...
Mechanical Properties of Waste Biaxially Oriented Polypropylene Metallized Films (BOPP), LLDPE: LDPE Films with Sisal Fibres
Abstract The current work describe the enhancement and improvisation of polymer composite repose of sisal fiber reinforcement, Biaxially Oriented Polypropylene (BOPP) and thermoplastic LLDPE: LDPE particulate fillers. T...