Interaction of energy-material flows in gas-liquid environments
Journal Title: Вісник Житомирського державного технологічного університету. Серія: Технічні науки - Year 2019, Vol 83, Issue 1
Abstract
The article deals with the features of the flow of energy-material transformations in sugar-containing environments of anaerobic fermentation. Endogenous processes - the synthesis of carbon dioxide, the synthesis of ethyl alcohol and the allocation of thermal energy - are estimated as primary with appropriate support based on the chemical energy of sugars. These three processes are accompanied by secondary energy-material manifestations in the following list: mass transfer between yeast cells and the medium; heat transfer between the medium and the cooling surface; creation of local cooled zones with a convective circulating contour; synthesis of the dispersed gas phase with the corresponding component of the circulating circuit; creation of a concentration gradient based on СО2 by hydrostatic pressure; creation of a driving factor in the form of Archimedes forces in action on the dispersed gas phase and, accordingly, on the liquid phase; vertical mixing of the environment in conjunction with the processes of its saturation and desaturation in local areas at the level of gravity processes. The mathematical formalizations concerning the named secondary energy-material processes with suggestions on improvement and organization of their flow are offered. The basis of the phenomenological analysis of the physical nature of the formation and existence of secondary energy material flows is the laws of thermodynamics, mechanics, hydromechanics, solubility of gases in their flow in a gravitational field under conditions of alternating pressures. It is shown that the natural course of transition processes should be strengthened by additional organized influences.
Authors and Affiliations
A. Sokolenko, K. Vasylkivsky
Keywords
Related Articles
- EP ID EP622374
- DOI -
- Views 108
- Downloads 0
Determination of forces acting on the car wheel at towing
The article analyzes the relevance of the research topics, defines goals and objectives, subject and object of research. Based on analysis of the literature, it was found that interaction model available propulsion wheel...
Synthesis of a quasi-optimal regulator of conveyor load of a mining company using the concept of the Pearson method
The use of conveyor loading control systems allows to ensure maximum energy efficiency of equipment operation. At the same time, the presence in the control loop of a link of pure delay and non-linear expression on state...
Design of a temperature regulator with high functionality
Cost increase of energy resource and, respectively, building heating rates compels the consumer to look for ways of heating cost reduction. The economy of means can be achieved by reducing the amount of generated heat, s...
The influence of moisture on the colour characteristics of natural stone
The objects of the research are the facing elements of buildings and architectural monuments. The subject of the study is the process of changing the colour of the decorative stone from moisture. To solve the problems of...
Study of ultrasonic exposure effect on retaining ability of diesel fuel in ammonium nitrate
The economic situation in Ukraine depends to a large extent on the mining and metallurgical complex, and therefore the introduction of safe and effective explosives for mining of minerals through the abandonment of TNT a...