INVESTIGATING THE EFFECT OF MATERIAL’S INITIAL TEMPERATURE ON SURFACE ROUGHNESS FOR MILLING OF AL 6061 ALLOY USING FULL FACTORIAL APPROACH
Journal Title: World Journal of Engineering Research and Technology - Year 2017, Vol 3, Issue 3
Abstract
The Al 6061 alloy has a wide variety of applications in automobile industries as well as aerospace industries due to its light weight to strength ratio, high corrosion resistance, heat treatable and easily weldable property. Quality and productivity are two important aspects for manufacturing industries for that purpose milling is the best option for machining of Al 6061. Milling is a process having wide variety of applications in the industry. While machining on the milling machine Surface Roughness (Ra) and Material Removal Rate are two output parameters comes into the picture. Surface roughness is influencing on allowance and external appearance of the final product. In this investigation, we are going to analyse process parameters are temperature, speed, feed and depth of cut. The research papers which are studied by us, we found that three basic parameters have been mostly studied are speed, feed and DOC. We are going to take a one parameter material’s initial temperature which is not studied much more as that of first three parameters. For investigation, full factorial approach has been used, by taking L16 array. This approach has been applied to investigate the maximize values of the cutting process in end milling for Al 6061 alloy in order to provide better surface finish. With the help of full factorial approach, by performing experiments it has been found that surface finish has gets affected by material’s initial temperature. Graphs and response table were used to find the effect of parameters in end milling process. Also, we are getting the mathematical model for Ra value with the help of regression analysis. The Ra value is getting 14% affected by reducing Material’s initial temperature.
Authors and Affiliations
U. D. Gulhane
Keywords
Related Articles
- EP ID EP658878
- DOI -
- Views 183
- Downloads 0
STUDY OF THE INTERACTION OF EUROPIUM WITH OXYGEN IN SILICON
The interaction of europium atoms with technological impurities (oxygen and carbon) in silicon was studied by infrared spectroscopy. It is established that the diffusion of europium in Si leads to a decrease in the conce...
A SOCIO-ECONOMIC ANALYSIS ON ENVIRONMENTAL HEALTH ISSUES IN THE HAMBANTOTA DISTRICT OF SRI LANKA
This article is based on a study conducted to identify causes and impacts of environmental health issues in the Hambantota district which is situated in the Dry Zone of the southern province of Sri Lanka. The analysis ha...
CONTROLLING MECHANISMS OF SPACE-CHARGE REGION IN COMPOUND FIELD-EFFECT TRANSISTORS
In the compound transistor being investigated, to prevent the failure of the direct-biased transistor, resistors are connected to their gates, the value of which is equal to the resistance of the locked gate. The gate tr...
EARTH FAULTED EQUIPMENT INDICATION SYSTEM FOR ISOLATED NEUTRAL SYSTEM
One of the major challenge in marine transport system is to find out and locate the position of earth fault on board ship. At present there is no standardized indication system to locate the position of earth faulted sys...
PERFORMANCE ENHANCEMENT IN IMAGE USING NOVEL EDGE DETECTION ALGORITHM
Edge detection is one of the most important tasks in digital image processing. Edges characterize the boundaries i.e. an edge is a boundary between an object and background. Edges in the images are the area with strong i...