Investigating the Mechanical Properties and Degradability of Bioplastics Made from Wheat Straw Cellulose and Date Palm Fiber
Journal Title: Journal of Agricultural Machinery - Year 2014, Vol 4, Issue 1
Abstract
During the past two decades, the use of bioplastics as an alternative to regular plastics has received much attention in many different industries. The mechanical and degradable properties of bioplastic are important for their utilization. In this research cellulose of wheat straw and glycerol were mixed by different weight ratios and then reinforced by using date palm fibers. To prepare the bioplastic plates, the materials were poured in molds and pressed by means of a hydraulic press and simultaneously heating of the molds. The experiments were performed based on a 3Ã3 factorial design with three levels: 50%, 60% and 70% of wheat cellulose and three types of reinforcement methods, namely: no-reinforcement, network reinforcement and parallel string reinforcement. The effect of the two factors on tensile strength, tensile strain, bending strength, modulus of elasticity and modulus of bending were investigated. The results indicated that the two factors and their interactions had significant effects on the mentioned properties of bioplastics (at α=0.05 level) . The comparison of the means of the tests showed that the network reinforcement type with 50% cellulose had the highest tensile and bending strengths with 1992.02 and 28.71 MPa, respectively. The maximum modulus of elasticity and modulus bending were 40.4 and 2.3 MPa, respectively for parallel string arrangement and 70% of cellulose. The degradability tests of bioplastic using a fistulated sheep indicated that with increasing the percentage of cellulose, the degradability rate deceased. The maximum degradability rate, after 48 h holding in the sheep rumen, was 74% that belonged to bioplastics with 50% cellulose. The degradability data were well fitted to a mathematical model (R2=0.97).
Authors and Affiliations
H. Omrani Fard,A. Ghazanfari Moghaddam,M. Yosefi Ansari,
Keywords
Related Articles
- EP ID EP717697
- DOI -
- Views 43
- Downloads 0
Effect of Pomegranate Seed Oil Encapsulated in Chitosan-capric Acid Nanogels Incorporating Thyme Essential Oil on Physicomechanical and Structural Properties of Jelly Candy
Pomegranate seed oil (PSO) is a well-known source of valuable compounds. The aim of this study was to investigate physicomechanical and structural properties of jelly candy enriched with PSO encapsulated in chitosan (CS)...
Effect of Compaction and Soil Moisture on Apparent Electrical Conductivity of Soil and Rolling Resistance of Tractor Tire
Introduction One of the main factors affecting plant growth is soil compaction. More attention should be paid to soil compaction than the past. Soil compaction not only destroys the soil structure, but also leads to a he...
Ventilation and Cooling Modeling and Lyout of Fans, Pads and Vents of an Octagonal Greenhouse
IntroductionGreenhouse technology is a ï¬exible solution for sustainable year-round cultivation of many horticulture products, particularly in regions with adverse climate conditions or limited water and resources. Gree...
Study and Determining Power, Fuel Requirements and Some Soil Physical Properties in Several Tillage Methods
Using the cropping operations program can significantly save fuel consumption and energy efficiency. Prediction of the accurate amount of fuel requirements for tillage operation of the soil is difficult. Changes in humid...
Mapping Alfalfa Yield Using an Energy Monitoring System on a Rectangular Hay Baler
The most advanced part of precision agriculture technology is yield monitoring of grain and non-grain crops. In this study, the horizontal pressing force of baling plunger and the angular position of the plunger connecti...