Investigating Tribological Processes in Polymeric Composites
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2011, Vol 34, Issue 4
Abstract
The paper presents some results on investigation of the superficial layers of several polymeric composites intended for tribological applications. The evaluation of the tribological behavior is done with the help of SEM images, virtual images obtained by 3D profilometry and X-ray diffractometry.
Authors and Affiliations
Lorena DELEANU, Constantin GEORGESCU
Keywords
Related Articles
- EP ID EP625591
- DOI -
- Views 90
- Downloads 0
Influence on Reduction Scheme Hardness Cold Rolled Strip Mark Steel ST 12
The paper presents the results of the research on the influence of the evolution hardness scheme rolled steel, for the cold-rolled strip steel St 12. St 12 is intended for the manufacture of cold rolled strip stamping pr...
Mathematical Model of the LD Steel Deoxidation Kinetics with Manganese and Aluminum
The paper presents the mathematical model of the kinetics of the electric arc furnace steel deoxidation with Mn and Al. Based on the solving of the kinetics model differential equations, the variation of the deoxidants s...
Characterisation of CVD Niobium Carbide Coatings on Hard Carbide Substrate
Hard coatings are often used for mechanical properties such as wear and friction resistance. The corrosion behaviour may also be an important criterion for industrial applications of these coatings. In this paper, the pr...
Noise Levels in Workplaces of Cold Rolling Mill Plant
The excessive noise exposure is one of numerous physical hazards present in the steel industry. Considerable noise develops the steel strips rolling process. In this study are presented and discussed the noise levels at...
Behavior of Cold Rolling Emulsions in the Obtaining Process of Steel Strips
The research was focused on determining an optimum rolling emulsion to be used on a cold rolling mill from Galfinband Galati Romania. In this plant are obtained steel strips with the thickness of 0.7-0.8 mm. The main par...