Investigation and analysis of the possibility of diffusionless phase transformations in the surface layer of a part under the action of grinding temperatures
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2018, Vol 4, Issue 12
Abstract
<p>The possibility of diffusionless phase transformations in the surface layer of the ground part under the influence of instantaneous grinding temperature is investigated and analyzed. This is important because the phase Feα-Feγ transformations that may occur when grinding parts lead to the appearance of so-called grinding burns, which 2-3 times reduce the reliability and durability of the part in the working mechanism. The mechanism of phase transformations, the critical temperature of these transformations and the associated processing modes that provide this temperature are determined. This allows a reasonable approach to the definition of grinding modes and, if necessary, the application of the cooling method. In addition, the problem of optimizing grinding regimes can be solved if the processing performance is taken as a target function, and grinding temperature as a limitation. With rapid surface heating of the hardened steel part by the grinding temperature above the Ac<sub>1</sub> line, there is a reverse martensitic transformation Feα→Feγ. The martensite range during cooling Mn-Mk to a large extent covers negative temperatures. Therefore, austenite is partially fixed in the surface layer, forming a so-called quenching burn. Dependences for determining the formation temperature for steel of any chemical composition<span style="text-decoration: line-through;">,</span> give the possibility to maintain the value of grinding temperature below this level during grinding. The mechanism of diffusionless reverse martensitic transformation in the high-speed surface heating by cutting grains (instantaneous temperature) is considered. The heating rate and the effect of the pressure produced by the abrasive grain on the metal during the chip removal are experimentally determined. Thus, the possibility of diffusionless phase transformation is substantiated and the dependences for the calculation of austenite formation temperatures are given, which in turn provides the opportunity to calculate safe processing regimes</p>
Authors and Affiliations
Ala Bezpalova, Vladimir Lebedev, Natalia Klimenko, Tatiana Chumachenko, Inga Uryadnikova
Keywords
Related Articles
- EP ID EP528137
- DOI 10.15587/1729-4061.2018.140982
- Views 73
- Downloads 0
The synthesis of control algorithm over a technical condition of the hydrogen generators based on hydroreactive compositions
<p>We have synthesized a control algorithm over technical condition of the hydrogen generators, which includes the following: forming initial data, determining the values for a phase-frequency characteristic of the gener...
Examining the Kalman filter in the field of noise and interference with the non-Gaussian distribution
<p>We have developed a sequential recursive Kalman Filter algorithm to filter data in the field of the non-Gaussian noise distribution to be used in measurement instruments. A special feature of the constructed Kalman Fi...
Forming the structure of whipped desserts when introducing the food additive "Magnetofood" to their formulation
<p>The food additive "Magnetofood", in the form of a nanopowder with particles the size of (70‒80) nm, has been designed and proposed as an improver for the structure of whipped desserts. "Magnetofood" can both independe...
Detection of human respiration patterns using deep convolution neural networks
<p class="a"><span lang="EN-US">The method for realtime recognition of respiration types (patterns) of a patient to monitor his conditions and threats to his health, which is a special case of the problem of human activ...
Development of a miniature microwave radiothermograph for monitoring the internal brain temperature
<p>To improve efficiency of non-invasive monitoring of the internal brain temperature, a small-size single-channel microwave radiothermograph consisting of a miniature radiometer and a radiometric sensor based on a print...