INVESTIGATION OF ABSORPTION OF HEAVY METALS AND POLLUTING MINERAL COMPOUNDS BY CARBON NANOPARTICLES PRODUCED FROM POMEGRANATE PEEL, AS WELL AS ELEMENTS EFFECTIVE ON IT
Journal Title: International journal of ecosystems and ecology science (IJEES) - Year 2019, Vol 9, Issue 1
Abstract
Existence of chemical pollutions and heavy metals in the environment, especially in surface and ground waters is followed by enormously harmful effects on public health. For the purpose of elimination of these pollutions, several methods including implementation of CNTs and active carbons yielding from agricultural wastes have been used. Considering the industrial variability of the city of Saveh, every year a large amount of polluting chemical wastewater enters the environment. The purpose of the present study was to eliminate the Nickel heavy metal and pollutions caused by mineral compounds through making use of pomegranate peel wastes for production of active carbons. For this purpose, various parameters such as pH, contact time, absorber amount, primary density of the metal, and Freundlich and Langmuir’s adsorption isotherms, as well as the overall experiment scheme were studied and investigated using the Design Expert Software. Results of the study showed that a pH of 8 is associated with the highest absorption level. In addition it was tuned out that by prolonging the contact time up to 50 minutes, more than 84.2% of the Nickel content is absorbed by the absorber. The obtained experimental data are in a roughly desirable consistence with the Freundlich and Langmuir’s isotherm models. The values yielded by the optimization of factors were evaluated in order to obtain an optimum elimination efficiency solution and a high selectivity percentage. In order to obtain the selectivity of 0.691 and the optimum elimination efficiency of 91.7432, the value of pH must be equal to 8, contact time must be 50 minutes, and the primary density must be 75mgs per liter.
Authors and Affiliations
Shahla Mozaffari, Narges Ajami, Juliet Ordoukhanin, Najmeh Eisaabadi
SENSORY PROPERTIES AND PHYSICO-CHEMICAL ANALYZES OF PASTEURIZED MILK
Pasteurized milk products, widely used in dietary diets, are highly popular products in the dairy industry. Safety and control of these products is part of food safety and includes technological processes as well as addi...
THE ROLE OF IT IN THE DEVELOPMENT OF DISTANCE LEARNING IN PUBLIC AND PRIVATE UNIVERSITIES IN KOSOVO
Distance learning is a neologism in the context of computer-based learning and lies in the use of IT and communication in the teaching process. Learning is based on internet services (in distance) or through a CD-ROM (of...
PREPARING CHITOSAN FROM SHRIMP SKIN AND OPERATING IT WITH EDTA AND USED IN THE REMOVAL OF HEAVY METALS OF WATER
The use of bio-polymers due to bio-degradability and low cost has been considered for the removal of heavy metals from water and wastewater. Chitosan polymer is a hydrophilic Cation that removes acetyl ketamine from the...
BIOMONITORING OF SO2 SPATIAL DISTRIBUTION ON THE TERRITORY OF THE REPUBLIC OF MOLDOVA
Based on the Air Quality Assessment Grades (GECA) and the Lichens Toxicity Scale (STL) versus SO2, developed by us, was tested the air quality, in 2007 and 2017, from 60 and 107 forest ecosystems and stations, respective...
ASSESSMENT OF THE STATE OF GREENNESS AND SUGGESTIONS FOR ITS IMPROVEMENT IN PRISHTINA SCHOOLS IN KOSOVO
The aim of the study is assessment of the condition of greenness in Prishtina schools and its positive role in students’ life. Prishtina is the capital of the Republic of Kosovo, extending in the eastern part of Kosovo,...