Investigation of fluid flow in the space of a liquid-ring vehicle
Journal Title: Журнал інженерних наук - Year 2017, Vol 4, Issue 1
Abstract
The article is devoted to defining of hydrodynamic power losses of liquid in liquid-ring machine, in its free blade area. The losses may be compared with those in working wheel. The complexity of optimization energy characteristics of liquid-ring machine consists of thermodynamic losses of gas compression in working area and gasdynamic losses, connected with gas flow in machine windows, losses connected with gas movement across dead volume and inner clearances. All this losses must be accounted for optimal geometric sizes choice. This losses have different nature and depend on different geometric factors. This is the reason of low liquid-ring machines efficiency (about 35–40 %).
Authors and Affiliations
Yu. Vertepov
Keywords
Related Articles
- EP ID EP240034
- DOI -
- Views 100
- Downloads 0
Model of the management program for a means complex of the design works automation as a finite-state automaton
For software development it is necessary to have its mathematical model. It is established that for a means complex of the design works automation a model of a finite automaton is the best choice. The automatic machine h...
Numerical Simulation of the Evaporative Air Cooler with a Capillary-Porous Structure
Application of evaporative air cooling in various technologies allows reducing energy costs for improving environmental performance. Considering the promise of using air coolers with a capillary-porous structure, a mathe...
Adjusting the size of the rope thread in the machining of dimensional tool
The article considers the possibility of adjustment the geometrical deviations profile rope thread with a large pitch, which appear as a consequence of wear of the cutting tool during machining. Due to the fact that the...
Diamond Grinding the Ceramic Balls from Silicon Carbide
The influence of the machining regime was experimentally investigated on the output indexes of the diamond grinding the ceramic balls from silicon carbide, such as the rate of the material removal and the rate of changin...
Research of Working Process of Vortex Expansion Machine with Side Channel
At gas distribution stations, a large amount of energy of compressed gases is lost. In such cases, the useful power is obtained with the aid of a turboexpander. The problem is that there is a great need for turboexpander...