Investigation of multiple contact interaction of elements of shearing dies
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 7
Abstract
<p>When justifying the design parameters, it is necessary to carry out the analysis of the strain-strain state of individual elements of technological systems, which are sets of parts under contact interaction conditions. These problems are nonlinear, and the principle of superposition does not apply to them. For this reason, the amount of calculations increases dramatically. To overcome this drawback, methods and models for the rapid and precise study of the strain-strain state of complex objects, taking into account contact interaction are developed. The feature of the problem statement is that the solution of contact problems under certain conditions linearly depends on the load. The patterns of contact pressure distribution are determined. It is concentrated in the areas of constant shape and size. Only the scale of contact pressure distribution varies.</p><p>This gives an opportunity to significantly accelerate design studies of die tooling while preserving the accuracy of numerical modeling of the stress-strain state.</p><p>The developed approach involves a combination of advantages of numerical and analytical models and methods for analyzing the stress-strain state of elements of shearing dies, taking into account contact interaction. This concerns the possibility to solve problems for a system of complex-shaped contacting bodies, which is impossible with the use of analytical models. On the other hand, the possibility of scaling the solutions of these problems with the stamping force is substantiated, which is generally not performed for nonlinear contact problems. So, it is sufficient to solve the problem of determining the strain-strain state of elements of such a shearing die. For the other value of stamping force, the proportionality rule is applied. Thus, the efficiency of research sharply increases and high accuracy of the obtained results is ensured.</p>
Authors and Affiliations
Mykola M. Tkachuk, Andriy Grabovskiy, Mykola Tkachuk A. , Iryna Hrechka, Olga Ishchenko, Natalia Domina
Keywords
Related Articles
- EP ID EP666899
- DOI 10.15587/1729-4061.2019.174086
- Views 73
- Downloads 0
Analysis of the properties of antifriction composites based on aluminum alloy's grinding waste
<p>We developed antifriction composites based on regenerated grinding waste of AM4.5Kd aluminum alloy with the addition of МоS<sub>2 </sub>solid lubricant intended for work in contact pairs of post-printing machines, suc...
Studying the load jam modes within the framework of a flat model of the rotor with an autobalancer
<p>This paper reports the analytically investigated load jam modes (balls, rollers, pendulums) within a flat model of the balanced rotor on isotropic elastic-viscous supports carrying the auto-balancer with many identica...
Change in the physicalmechanical and decorative properties of labradorite under thermal exposure
<p>We have experimentally investigated samples from the four fields of coarse-grained labradorite, which is extracted in Ukraine. The samples of labradorite were tested at high temperatures of 200, 300, 400, 500, 600, 70...
Substantiation of the interaction mechanism between the lipo- and glucoproteids of rye-wheat flour and nanoparticles of the food additive «Magnetofооd»
<p>The mechanism of interaction between nanoparticles (NP) from the polyfunctional food additive «Magnetofood» and functional groups of complex proteins of rye-wheat flour is established. NP of the food additive «Magneto...
Development of engobe composition with the use of pharmaceutical glass waste for glazed ceramic granite
<p>This paper reports results of research into the application of pharmaceutical glass waste, which is a mixture of medical ampoules, in the production of ceramic tiles. Disposal of such waste reduces the negative impact...