Investigation of Natural Frequency Values of Composite Cover Design with Different Laying Angles
Journal Title: Engineering Perspective - Year 2022, Vol 2, Issue 4
Abstract
In this study, the effect of composite laying angle on the natural frequency values of a long and flexible cover made of laminated composite material was investigated. Investigation of the effect of the laying angle, a composite cover with rib design with the topgraphy optimization method was used. The cover design used in the study is an industrial design product and has producible features. A design with a total of 20 different laying angles has been made on the ribbed and ribless parts of the composite cover. Care was taken that the selected laying angles do not interfere with manufacturability. Designs with different laying angles are modeled with the ANSYS ACP module. The modal analysis of the created designs was carried out with the finite difference method in the ANSYS program environment. As a result of the modal analysis, natural frequency values of mode 1, mode 2, mode 3, mode 4, mode 5 and mode 6 of these designs were obtained. It was concluded that the best mode 2 natural frequency values (45°,-45°,45°,-45°,45°,-45°,45°) were obtained by using the degree of laying angles. In this design, mode 2 has a natural frequency value of 12.2 Hz, mode 3 33 Hz, mode 4 40.9 Hz, mode 5 57.8 Hz and mode 6 82.7 Hz. In this design, mode 2 has a natural frequency value of 12.2 Hz, mode 3 33 Hz, mode 4 40.9 Hz, mode 5 57.8 Hz and mode 6 82.7 Hz.
Authors and Affiliations
Mehmet Can Katmer, Adnan Akkurt, Tolga Kocakulak
Keywords
Related Articles
- EP ID EP720806
- DOI http://dx.doi.org/10.29228/eng.pers.66826
- Views 39
- Downloads 1
Autonomous Feed Pushing Robot Design and Manufacturing
The inability of animals to reach the food during feeding causes stress and may lead to a decrease in milk yield. At this point, adequate nutrition of animals in farms is very important in terms of milk yield. In this st...
Response Surface Method Based Optimization of the Viscosity of Waste Cooking Oil Biodiesel
In this study, biodiesel fuel production from waste sunflower oil and viscosity optimization was carried out. Dur-ing the production process, catalyst ratio, alcohol ratio and reaction temperature were determined as vari...
Quarter Car Active Suspension System Control Using Fuzzy Controller
The performance of active suspension systems is directly related to the mechanical design and control of the system. The stable operation of the controller improves driving comfort and handling. The quarter car model is...
Evaluation of Electrification of 4W Light Commercial Vehicle
Road transport is a prime contributor to CO2 emissions in the Indian transportation sector. The motor vehicle fleet in India is responsible for 90% of the total energy consumption in the transport industry and of this, 4...
Capacity Analysis Based on Vehicle Trajectory Data on a Weaving Bottleneck in Nanjing
This paper investigates the capacity of weaving bottlenecks in Nanjing, where multiple traffic streams merge or diverge closely, causing significant traffic disruptions. Utilizing trajectory data from 862 vehicles collec...