Investigation of Optical Properties of Polymeric Composite (PVA/PVP) Doped by Potassium Chromate
Journal Title: Engineering and Technology Journal - Year 2024, Vol 9, Issue 09
Abstract
The practical out comes of the present study involves preparation of [Poly(vinyl) alcohol (PVA)]/[ pyrrolidone (PVP)] (50:25 wt%) composites doped by Potassium Chromate (K2CrO4) purity of 99% with different volume concentration (1.6% up to 7.7%) by simple solution casting method. The optical properties of the films were verified using UV-Vis-NIR spectroscopic analysis. The optical constants such as absorption coefficient, refractive index,Extinction coefficient real and imaginary parts of dielectric constant have been investigated, results show that the optical constants are affected by concentration of Potassium Chromate addition in the (PVA:PVP) blend . The optical gap decreased from 3.5 eV for pure (PVA:PVP) polymer blend to 2.5 eV for [(PVA:PVP)/ Potassium Chromate 7.7 wt%] while the refractive index increased from 2.43 to 2.74 depended on Potassium Chromate additive.Hybrid polymeric composites of Potassium Chromate additive in (PVA:PVP) can be considered as a promising material for different electronic application.
Authors and Affiliations
Nadhim A. Abdullah ,Hussein F. Hussein 2,Khalid I. Ajeel ,Shatha S. Ebade,
Keywords
Related Articles
- EP ID EP744858
- DOI 10.47191/etj/v9i09.15
- Views 36
- Downloads 0
PARAMETRIC RISK ASSESSMENT OF INDUSTRIAL STORAGE TANKS
In the past, various damages have been observed in large number of industrial facilities during the experienced earthquakes. Different than the residential buildings, damages in industrial facilities have a significant d...
Static, Rigid Dynamics and Computational Fluid Dynamic Simulation of a Zero Co2 and Zero Heat Pollution Compressed Air Engine for the Urban Transport Sector
This article presents major findings created during a research work for sustainable solutions towards the ozone layer depletion and global warming in the name of modeling and simulating a zero CO2 and zero heat pollution...
FDM 3D PRINTING AS AN ALTERNATIVE FORM OF MAKING PATTERN FOR METAL CASTING: A COMPARISON WITH WOOD-BASED PATTERN
The problem with the wood-based design is that it changes size when it absorbs water, which can make the pattern grow and shrink, and the surface goes away, making it unsuitable for mass production. Plastic is the most c...
DEVELOPMENT OF A LABORATORY-BASED AUTOMATED IRRIGATION PROTOTYPE
Advanced technology plays significance roles in the field of agriculture. Daily activities associated to farming or garden watering is the most essential cultural and the most labour intensive task. Automation is a techn...
Under Voltage Relay System for Battery and DC Load Safety Using Arduino Nano
The quality of the electric power supply in an electrical system is very necessary. One of the important things that need to be considered is the quality of the voltage supply. The disturbance in the electrical system is...