Investigation of some of the properties of fossil fuels and biofuels blends to use in SI engines

Abstract

In this research work, gasoline fuel was considered as the base fuel. Bioethanol, biodiesel and diesel fuel were added to gasoline as additives. The fuel blends were first prepared on different volume basis and then, some important properties of the blends including density, dynamic viscosity, kinematic viscosity and water and sediment were evaluated by following ASTM test methods. The obtained data were analyzed and the results showed that increasing the volume percentage of bioethanol, biodiesel and diesel in fuel blends affect the fuel blends properties, these properties helped to identify the effected blended fuels to utilize at SI engine. At second step, 3 optimized blended fuels were selected based on the fuels properties (E20= 20% ethanol and 80% gasoline- GS1=10% ethanol, 2.5% biodiesel, 2.5% diesel and 85% gasoline- GS2= 18.1% ethanol, 4.31% biodiesel, 4.31% diesel and 73.28% gasoline). These optimized blended fuels were utilized in SI engine and the performance and emission parameters were analyzed.

Authors and Affiliations

Pegah Nematizade| Tarbiat Modares University, P.O.Box:14115-111, Tehran - Iran, Barat Ghobadian*| Tarbiat Modares University, P.O.Box:14115-111, Tehran - Iran, Fathollah Ommi| Tarbiat Modares University, P.O.Box:14115-111, Tehran - Iran, Gholamhassan Najafi| Tarbiat Modares University, P.O.Box:14115-111, Tehran - Iran, Ahmad Abbaszadeh| Tarbiat Modares University, P.O.Box:14115-111, Tehran - Iran

Keywords

Related Articles

The electromechanical control of valve timing at different supply voltages

Electromechanical valve systems (EMS) add advantages to engines in terms of performance and emission by eliminating the limitations of conventional variable valve systems that operate mechanically. Electromechanical valv...

Possibility of Turkey to Transit Electric Vehicle-based Transportation

Electric vehicles (EV) are widely viewed as attractive rivals to internal combustion engines. However, to explore economic challenges of EVs is of crucial importance. This paper analyses the potential of Turkey to transi...

Experimental investigation of isopropyl alcohol (IPA) /diesel blends in a diesel engine for improved exhaust emissions

This study focuses on the effect of blending isopropyl alcohol (IPA) and diesel fuel with conventional diesel. The effect of isopropyl alcohol on a diesel engine was examined experimentally in a three-cylinder direct inj...

Performance and exhaust emissions of a spark ignition engine using G-Series and E20 fuels

In this research paper, performance and exhaust emissions of a spark ignition (SI) engine (XU7JP/L3) is presented. A gasoline-ethanol blend (E20) and G-Series fuel, of GS1 and GS2, which is a mixture of gasoline, ethanol...

Turbocharger Lubrication - Lubricant Behavior and Factors That Cause Turbocharger Failure

This paper is a review of the turbocharger lubrication system and at the same time an attempt to point out and analyze the factors responsible for turbocharger wear, damage and failures. In particular, the conditions und...

Download PDF file
  • EP ID EP3878
  • DOI -
  • Views 606
  • Downloads 30

How To Cite

Pegah Nematizade, Barat Ghobadian*, Fathollah Ommi, Gholamhassan Najafi, Ahmad Abbaszadeh (2013). Investigation of some of the properties of fossil fuels and biofuels blends to use in SI engines. International Journal of Automotive Engineering and Technologies, 2(4), 92-103. https://europub.co.uk./articles/-A-3878